| Catalog # | Title | Boat Type | Artist/Maker | Date Made | Description | Dimensions | Place Made | Full Image | CBMM Cat. Page |
|---|---|---|---|---|---|---|---|---|---|
| 2011.0002.0029.03 | Early Yawl | Yawl | Gillmer, Thomas C - Creator | Exact 03/02/1980 - 03/02/1980 | Plans for an Early Yawl, Design #580. Drawings depict the sheer, body, and half-breadth plans. | 33.000in - 21.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.03 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Circa 08/11/1986 - 08/11/1986 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #690. Drawing depicts the ships curves of form for hydrostatic variation with drafts. The graph consists of eight curves representing various measurements. There is a small line drawing of the ship's hull. The drawing is stamped "Approved Subject to Comments in Marine Safety Center Letter of August 11, 1986 signed by J.C. Makham (?), Commanding Officer, United States Coast Guard Marine Safety Center". | 16.000in - 21.500in | Image 1 | open CBMM page | |
| 2011.0002.0021.02 | 35' Motor Sailer | Motor sailer | Gillmer, Thomas C - Creator | Exact 05/29/1969 - 05/29/1969 | Plans for a 35' Motor Sailer, Design No. 390. Drawings depict the hull module studies and have three small hull lines drawings of sailboats. An additional larger hull lines drawing is given in three perspectives (side, rear, top). Drawing is the same as 2011.0002.0021.01. | 21.750in - 29.250in | Image 1 | open CBMM page | |
| 2011.0002.0044.01 | Draketai | Draketail | Gillmer, Thomas C - Creator | Exact 12/07/1990 - 12/07/1990 | Plans for a Draketail, Design #800. Drawing is a concept design for Robert. Besse. | 16.500in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0044.02 | Draketail | Draketail | Gillmer, Thomas C - Creator | Exact 01/14/1991 - 01/14/1991 | Plans for a Draketail, Design #800. Drawing depicts the principle dimensions and table of offsets. | 30.500in - 21.750in | Image 1 | open CBMM page | |
| 2011.0002.0044.03 | Draketail | Draketail | Gillmer, Thomas C - Creator | Exact 12/14/1990 - 12/14/1990 | Plans for a Draketail, Design #800. Drawing depicts the hull lines. | 39.500in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0044.04 | Draketail | Draketail | Gillmer, Thomas C - Creator | Exact 02/05/1991 - 02/05/1991 | Plans for a Draketail, Design #800. Drawing depicts a structural section. | 30.250in - 17.250in | Image 1 | open CBMM page | |
| 2011.0002.0044.05 | Draketail | Draketail | Gillmer, Thomas C - Creator | Exact 02/15/1991 - 02/15/1991 | Plans for a Draketail, Design #800. Drawing depicts the structural sections. | 40.500in - 23.500in | Image 1 | open CBMM page | |
| 2011.0002.0041.01 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 10/05/1987 - 10/05/1987 | Plans for the Kalmar Nyckel, Design #750. Drawing depicts the draft sheer, body and half-breadth plans. Drawing is marked as sheet one. | 35.750in - 28.750in | Image 1 | open CBMM page | |
| 2011.0002.0041.05 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 03/20/1988 - 03/20/1988 | Plans for the Kalmar Nyckel, Design #750. Drawings depict the structural views, inboad profile, deck plan, and cross section at stations 5 and 8, and a table of basic scantlings. Drawing is marked as sheet four. | 37.000in - 29.000in | Image 1 | open CBMM page | |
| 2011.0002.0041.07 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 03/24/1986 - 03/24/1986 | Plans for the Kalmar Nyckel, Design #750. Drawings depict the sheer, body and half-breadth plans and the table of offsets. | 25.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0041.08 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 04/25/1986 - 04/25/1986 | Plans for the Kalmar Nyckel, Design #750. Drawings depict the preliminary design, dimensional study and profile, to include the outboard profile, a view of the uppermost strakes, and a substantial amount of detail showing decorations and planking. | 21.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0041.10 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Circa 04/01/1986 - 04/01/1986 | Plans for the Kalmar Nyckel, Design #750. Drawing depicts the hull, fairly detailed. | 9.000in - 25.250in | Image 1 | open CBMM page | |
| 2011.0002.0041.11 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 09/21/1987 - 09/21/1987 | Plans for the Kalmar Nyckel, Design #750. Drawings depict the sheer, body and half-breadth plans. Drawing is marked as 1st Draft. | 30.250in - 24.500in | Image 1 | open CBMM page | |
| 2011.0002.0041.12 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Circa 09/01/1987 - 09/01/1987 | Plans for the Kalmar Nyckel, Design #750. Drawing depicts the inboard profile and cross section at stations 5 and 8. | 33.500in - 24.500in | Image 1 | open CBMM page | |
| 2011.0002.0041.13 | Kalmar Nyckel | Not specified | Gillmer, Thomas C - Creator | Exact 09/21/1987 - 09/21/1987 | Plans for the Kalmar Nyckel, Design #750. Drawing depicts the sheer, body and half-breadth plans. Drawing is marked as 1st Draft. Same as 2011.0002.0015.11. | 28.500in - 38.500in | Image 1 | open CBMM page | |
| 2011.0002.0037.03 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 02/18/1983 - 02/18/1983 | Plans for Design #710. Drawing depicts the structural profile and deck layout. | 23.250in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0037.04 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 02/25/1983 - 02/25/1983 | Plans for Design #710. Drawing is the arrangement plan. | 30.000in - 25.000in | open CBMM page | ||
| 2011.0002.0037.07 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 03/07/1983 - 03/07/1983 | Plans for Design #710. Drawing depicts the joiner sections. | 30.000in - 20.500in | Image 1 | open CBMM page | |
| 2011.0002.0011.10 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/14/1955 - 01/14/1955 | Plans for a Cruising Sloop, Design No. 80. Drawings depict the port inboard profile, starboard inboard profile, and section 5 Accomodations plan. Drawing is the same as 2011.0002.0011.09. Material is printed on plastic. | open CBMM page | |||
| 2011.0002.0015.11 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 11/24/1959 - 11/24/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict the offset table and profile offsets. Same as drawing 2022.0002.0015.06. | 23.250in - 30.750in | Image 1 | open CBMM page | |
| 2011.0002.0015.12 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/14/1963 - 08/14/1963 | Plans for a Fiberglass Sloop, Design No. 220. Drawing depicts an alternate deck plan and cabin plan. Drawing is the same as 2011.0002.0015.10. | 23.000in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0016.02 | Same as 2011.2.16.1 / D 250 Plan + Inboard Profile | Not specified | Gillmer, Thomas C - Creator | Exact 05/14/1960 - 05/14/1960 | Same as 2011.2.16.1 / D 250 Plan + Inboard Profile. <CR>Rough sketch of hull, two perspectives. | 30.500in - 40.000in | Image 1 | open CBMM page | |
| 2011.0002.0016.05 | Design no. 250 Unlabeled Hull Profile | Not specified | Gillmer, Thomas C - Creator | Circa 05/01/1960 - 05/30/1960 | Design no. 250 Unlabeled Hull Profile. <CR>Rough sketch of hull, side profile. | 30.250in - 41.250in | Image 1 | open CBMM page | |
| 2011.0002.0016.04 | Design no. 250 Lines and Offsets | Not specified | Gillmer, Thomas C - Creator | Exact 07/17/1957 - 07/17/1957 | Design no. 250 Lines and Offsets.<CR>Contract Drawing. | 29.500in - 69.000in | Image 1 | open CBMM page | |
| 2011.0002.0018.08 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 02/22/1964 - 02/22/1964 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawing depicts the constructionplan and is the same as 2011.0002.0018.07. | 29.500in - 39.750in | Image 1 | open CBMM page | |
| 2011.0002.0026.03 | HMS Druid | Not specified | Gillmer, Thomas C - Creator | Exact 03/18/1978 - 03/18/1978 | Plans for the HMS Druid, Design No. 530. Drawings depict the structural profile and section. It is similar to 2011.0002.0026.02. | 27.000in - 45.000in | Image 1 | open CBMM page | |
| 2011.0002.0027.01 | Colonial Brig | Not specified | Gillmer, Thomas C - Creator | Exact 03/10/1978 - 03/10/1978 | Plans for a Colonial Brig, Design #540. Drawings depict the hull lines draft and profile. | 21.750in - 44.250in | Image 1 | open CBMM page | |
| 2011.0002.0027.02 | Colonial Brig | Not specified | Gillmer, Thomas C - Creator | Exact 03/10/1978 - 03/10/1978 | Plans for a Colonial Brig, Design #540. Drawing depicts the hull lines draft and profile. Printed on plastic. Same as 2011.0002.0027.01. | 22.250in - 42.250in | Image 1 | open CBMM page | |
| 2011.0002.0027.03 | Colonial Brig | Not specified | Gillmer, Thomas C - Creator | Exact 03/20/1978 - 03/20/1978 | Plan for a Colonial Brig, Design #540. Drawing depicts the rigging profile. | 24.500in - 34.250in | Image 1 | open CBMM page | |
| 2011.0002.0027.04 | Colonial Brig | Not specified | Gillmer, Thomas C - Creator | Exact 03/20/1978 - 03/20/1978 | Plan for a Colonial Brig, Design #540. Drawing is the rigging profile. Same as 2011.0002.0027.03. Printed on plastic. | 24.500in - 31.500in | Image 1 | open CBMM page | |
| 2011.0002.0028.02 | Unidentified Vessel | Unidentified vessel | Gillmer, Thomas C - Creator | Exact 06/25/1978 - 06/25/1978 | Plan for an unidentified vessel, Design #560. Drawing depicts the preliminary profile. | 28.500in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0028.03 | Unidentified Vessel | Unidentified vessel | Gillmer, Thomas C - Creator | Exact 06/27/1978 - 06/27/1978 | Plan for an unidentified vessel, Design #560. Drawing depicts the proposed midsection. | 15.750in - 8.500in | Image 1 | open CBMM page | |
| 2011.0002.0028.04 | Unidentified Vessel | Unidentified vessel | Gillmer, Thomas C - Creator | Exact 07/14/1978 - 07/14/1978 | Plan for an unidentified vessel, Design #560. Drawing depicts the hull lines working draft. | 24.500in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0028.05 | Unidentified Vessel | Unidentified vessel | Gillmer, Thomas C - Creator | Exact 08/12/1978 - 08/12/1978 | Plan for an unidentified vessel, Design #560. Drawing depicts the basic sections. | 18.000in - 30.750in | Image 1 | open CBMM page | |
| 2011.0002.0029.01 | Early Yawl | Yawl | Gillmer, Thomas C - Creator | Exact 02/11/1980 - 02/11/1980 | Plan for an Early Yawl, Design #580. Drawing depicts an UFO profile study. | 21.750in - 31.500in | Image 1 | open CBMM page | |
| 2011.0002.0029.02 | Early Yawl | Yawl | Gillmer, Thomas C - Creator | Exact 03/02/1980 - 03/02/1980 | Plans for an Early Yawl, Design #580. Drawings depict the sheer, body and half-breadth plans. | 21.500in - 34.250in | Image 1 | open CBMM page | |
| 2011.0002.0029.05 | Early Yawl | Yawl | Gillmer, Thomas C - Creator | Exact 04/24/1980 - 04/24/1980 | Plans for an Early Yawl, Design #580. Drawings depict the inboard profile and bow/stern details. | 22.250in - 33.750in | Image 1 | open CBMM page | |
| 2011.0002.0029.07 | Early Yawl | Yawl | Gillmer, Thomas C - Creator | Exact 09/08/1980 - 09/08/1980 | Plans for an Early Yawl, Design #580. Drawing is the structural plan. | 19.750in - 34.000in | Image 1 | open CBMM page | |
| 2011.0002.0030.01 | 35' Raised Deck Cruising Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 01/02/1980 - 01/02/1980 | Plans for a 35' Raised Deck Cruising Cutter, Design #590. Drawing depicts a profile study and includes the outboard profile, body plan, and midship section. | 22.250in - 21.000in | Image 1 | open CBMM page | |
| 2011.0002.0031.01 | Raised Deck Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 11/23/1979 - 11/23/1979 | Plans for a Raised Deck Cutter, Design #600. Drawing is a profile study #1. | 24.000in - 18.000in | Image 1 | open CBMM page | |
| 2011.0002.0031.02 | Raised Deck Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 12/06/1979 - 12/06/1979 | Plans for a Raised Deck Cutter, Design #600. Drawing is profile study #2. | 24.000in - 18.250in | Image 1 | open CBMM page | |
| 2011.0002.0031.03 | Raised Deck Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 01/21/1980 - 01/21/1980 | Plans for a Raised Deck Cutter, Design #600. Drawing is profile study #3. | 19.500in - 18.250in | Image 1 | open CBMM page | |
| 2011.0002.0035.06 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Exact 02/17/1982 - 02/17/1982 | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction from fresco at Isle of Thera. Drawings depict the preliminary draft of the sheer, body and half-breadth plans. The drawing is the Same as 2011.0002.0035.04. | 17.750in - 30.750in | Image 1 | open CBMM page | |
| 2011.0002.0036.02 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Circa 08/11/1986 - 08/11/1986 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #690. Drawing represents the boats curves of form. | 16.000in - 21.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.04 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 05/03/1982 - 05/03/1982 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #690. Drawing is a preliminary profile concept and hull design. | 24.500in - 38.000in | Image 1 | open CBMM page | |
| 2011.0002.0036.06 | Pungy Schooner 1880 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 02/25/1985 - 02/25/1985 | Pungy Schooner 1880 Lady Maryland, Design #695. Drawing depicts the draft sheer, body and half-breadth plans. | 26.000in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0036.07 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 03/18/1985 - 03/18/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing is the table of offsets. | 23.750in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0036.08 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 02/20/1985 - 02/20/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing depicts the draft of the sheer, body and half-breadth plans. | 25.000in - 40.750in | Image 1 | open CBMM page | |
| 2011.0002.0036.10 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 04/25/1985 - 04/25/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawings depict the profile and sections. | 25.750in - 38.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.11 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 05/04/1985 - 05/04/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawings depict the stem structure and external ballast detail. | 9.000in - 17.500in | Image 1 | open CBMM page | |
| 2011.0002.0036.12 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 05/04/1985 - 05/04/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawings depict the rudder structure and dimensional detail. | 11.000in - 9.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.13 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 06/21/1985 - 06/21/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing is the spar plan. | 31.250in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.14 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 09/20/1985 - 09/20/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing depicts the bow and stern detail. | 24.750in - 37.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.15 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 10/11/1958 - 10/11/1958 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing depicts the rigging iron. | 27.750in - 26.000in | Image 1 | open CBMM page | |
| 2011.0002.0036.16 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 11/20/1985 - 11/20/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing represents a floodability analysis. | 23.000in - 38.000in | Image 1 | open CBMM page | |
| 2011.0002.0036.18 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Range, Cir 01/01/1985 - 12/30/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing represents the static stability curve. | 8.500in - 13.750in | Image 1 | open CBMM page | |
| 2011.0002.0036.19 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Range, Cir 01/01/1985 - 12/30/1985 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing depicts the hull lines. | 18.250in - 24.250in | Image 1 | open CBMM page | |
| 2011.0002.0036.20 | Pungy Schooner 1870 Lady Maryland | Pungy schooner | Gillmer, Thomas C - Creator | Exact 04/16/1986 - 04/16/1986 | Plans for the Pungy Schooner 1870 Lady Maryland, Design #695. Drawing depicts the stern davit detail and quarter rail. | 22.000in - 28.500in | Image 1 | open CBMM page | |
| 2011.0002.0037.02 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 01/21/1983 - 01/21/1983 | Plans for Design #710. Drawing is the waterline profile. | 17.500in - 28.000in | Image 1 | open CBMM page | |
| 2011.0002.0037.08 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 02/09/1983 - 02/09/1983 | Plans for Design #710. Drawing is the offset table. | 21.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0037.09 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 08/01/1983 - 08/01/1983 | Plans for Design #710. Drawing depicts the pilot house and deck. | 19.500in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0037.10 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 01/23/1983 - 01/23/1983 | Plans for Design #710. Drawing depicts the basic structural sections. | 16.250in - 23.250in | Image 1 | open CBMM page | |
| 2011.0002.0037.11 | Design #710 | Not specified | Gillmer, Thomas C - Creator | Exact 01/20/1983 - 01/20/1983 | Plans for Design #710. Drawing depicts the working hull lines draft. | 24.000in - 37.750in | Image 1 | open CBMM page | |
| 2011.0002.0038.01 | Trireme | Not specified | Gillmer, Thomas C - Creator | Exact 01/01/1983 - 12/30/1983 | Plans for the Trireme, Design #720. Drawing is an unlabeled illustration. | 9.750in - 15.250in | Image 1 | open CBMM page | |
| 2011.0002.0038.02 | Trireme | Not specified | Gillmer, Thomas C - Creator | Exact 01/01/1983 - 12/30/1983 | Plans for the Trireme, Design #720. Drawing is an unlabeled llustration #2. | 7.750in - 12.500in | Image 1 | open CBMM page | |
| 2011.0002.0038.03 | Trireme | Not specified | Gillmer, Thomas C - Creator | Exact 04/05/1983 - 04/05/1983 | Plans for the Trireme, Design #720. Drawing is an unlabeled profile. | 12.500in - 22.000in | Image 1 | open CBMM page | |
| 2011.0002.0038.04 | Trireme | Not specified | Gillmer, Thomas C - Creator | Circa 01/01/1983 - 12/30/1983 | Plans for the Trireme, Design #720. Drawing depicts an unlabeled profile #2. | 11.750in - 20.500in | Image 1 | open CBMM page | |
| 2011.0002.0038.05 | Trireme | Not specified | Gillmer, Thomas C - Creator | Exact 02/03/1985 - 02/03/1985 | Plans for the Trireme, Design #720. Drawing is an unlabeled profile #3. | 10.500in - 26.000in | Image 1 | open CBMM page | |
| 2011.0002.0039.01 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 05/12/1983 - 05/12/1983 | Plans for a 61' Gaff Cutter, Design #730. Drawing is a profile hull study. | 19.750in - 25.500in | Image 1 | open CBMM page | |
| 2011.0002.0039.03 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 10/21/1983 - 10/21/1983 | Plans for a 61' Gaff Cutter, Design #730. Drawing is a profile study and hull #2 design. | 18.000in - 28.500in | Image 1 | open CBMM page | |
| 2011.0002.0039.04 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 10/21/1983 - 10/21/1983 | Plans for a 61' Gaff Cutter, Design #730. Drawing is a profile study and hull #2 design. Same as 2011.0002.0039.03. | 28.500in - 43.500in | Image 1 | open CBMM page | |
| 2011.0002.0039.06 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 02/02/1984 - 02/02/1984 | Plans for a 61' Gaff Cutter, Design #730. Drawing is a hull lines draft. | 24.250in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0039.07 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 02/17/1984 - 02/17/1984 | Plans for a 61' Gaff Cutter, Design #730. Drawing is the table of offsets. | 23.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0039.08 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Range, Cir 01/01/1983 - 12/30/1984 | Plans for a 61' Gaff Cutter, Design #730. Drawing is an unlabeled profile and a depiction of the engine. | 29.500in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0039.09 | 61' Gaff Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 01/15/1984 - 01/15/1984 | Plans for a 61' Gaff Cutter, Design #730. Drawing depicts unlabeled hull lines (Original). | 21.750in - 42.750in | Image 1 | open CBMM page | |
| 2011.0002.0040.01 | United States Ship 1779 | Not specified | Gillmer, Thomas C - Creator | Exact 01/04/1985 - 01/04/1985 | Plans for a United States Ship 1779, Design #740. Drawing is a hull lines draft. | 21.000in - 41.000in | Image 1 | open CBMM page | |
| 2011.0002.0040.02 | United States Ship 1779 | Not specified | Gillmer, Thomas C - Creator | Exact 01/05/1985 - 01/05/1985 | Plans for a United States Ship 1779, Design #740. Drawing is a hull lines draft similar to 2011.0002.0040.01. | 19.250in - 40.250in | Image 1 | open CBMM page | |
| 2011.0002.0040.03 | United States Ship 1779 | Dinghy | Gillmer, Thomas C - Creator | Exact 04/01/1984 - 04/01/1984 | Plans for a United States Ship 1779, Design #740. Drawing is for a dinghy. | 18.250in - 24.000in | Image 1 | open CBMM page | |
| 2011.0002.0042.05 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 01/02/1987 - 01/02/1987 | Plans for the Pride of Baltimore II, Design #760. Drawing represents the hydrostatic properties. Drawing is marked as "Cancelled". | 18.750in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0042.06 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 01/12/1988 - 01/12/1988 | Plans for the Pride of Baltimore II, Design #760. Drawing represents the hydrostatic properties, revised draft. | 19.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0042.08 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 07/20/1986 - 07/20/1986 | Plans for the Pride of Baltimore II, Design #760. Drawing is a study concept.* Additional copy in file. | 24.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0042.09 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 07/22/1986 - 07/22/1986 | Plans for the Pride of Baltimore II, Design #760. Drawing is a study concept, profile and section. | 16.750in - 27.750in | Image 1 | open CBMM page | |
| 2011.0002.0042.10 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 09/29/1986 - 09/29/1986 | Plans for the Pride of Baltimore II, Design #760. Drawing is atudy concept sheet 2. | 19.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0042.11 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 02/14/1987 - 02/14/1987 | Plans for the Pride of Baltimore II, Design #760. Drawings depict various structural views. Drawing is marked "Cancelled". | 24.000in - 38.000in | Image 1 | open CBMM page | |
| 2011.0002.0042.12 | Pride of Baltimore II | Not specified | Gillmer, Thomas C - Creator | Exact 04/14/1987 - 04/14/1987 | Plans for the Pride of Baltimore II, Design #760. Drawing depicts the arrangement plan and profile. Drawing is marked "Cancelled". | 25.500in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0043.01 | Santa Maria | Not specified | Gillmer, Thomas C - Creator | Exact 02/17/1989 - 02/17/1989 | Plans for the Santa Maria, Design #790. Drawing is a preliminary profile. * Additional copies, related illustrations in file. | 22.250in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0043.02 | Santa Maria | Not specified | Gillmer, Thomas C - Creator | Exact 02/20/1989 - 02/20/1989 | Plans for the Santa Maria, Design #790. Drawing is a preliminary section. | 16.250in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0043.03 | Nina | Not specified | Gillmer, Thomas C - Creator | Exact 07/11/1990 - 07/11/1990 | Plans for the Nina, Design #790. Drawing is a profile.* Additional copies, related illustrations in file. | 20.500in - 22.000in | Image 1 | open CBMM page | |
| 2011.0002.0043.04 | Pinta | Not specified | Gillmer, Thomas C - Creator | Exact 07/15/1990 - 07/15/1990 | Plans for the Pinta, Design #790. Drawing is a profile.* Additional copies, related illustrations in file. | 21.750in - 23.000in | Image 1 | open CBMM page | |
| 2011.0002.0043.05 | Victoria 1519 | Not specified | Gillmer, Thomas C - Creator | Range, Cir 01/01/1985 - 12/30/1990 | Plans for the Victoria 1519, Design #790. Drawing is an unlabeled profile. | 25.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0045.02 | Model C-2 | Not specified | Gillmer, Thomas C - Creator | Exact 02/13/1961 - 02/13/1961 | Plans for Model C-2. Drawing depicts the hull lines. | 17.000in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0045.01 | Model C-1 | Not specified | Gillmer, Thomas C - Creator | Exact 02/13/1961 - 02/13/1961 | Plans for Model C-1. Drawing depicts the hull lines. | 15.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0045.03 | Model M-1 | Not specified | Gillmer, Thomas C - Creator | Exact 02/13/1961 - 02/13/1961 | Plans for Model M-1. Drawing depicts the hull lines. | 18.250in - 38.750in | Image 1 | open CBMM page | |
| 2011.0002.0046.02 | USNA Research Model FAO - 2 | Not specified | Gillmer, Thomas C - Creator | Exact 08/30/1963 - 08/30/1963 | Plans for USNA Research Model FAO - 2. *Additional copy in file (not annotated). | 14.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0046.01 | USNA Research Model FAO - 1 | Not specified | Gillmer, Thomas C - Creator | Exact 08/30/1963 - 08/30/1963 | Plans for USNA Research Model FAO - 1. *Additional copy in file (not annotated). | 15.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0047.00 | Auxiliary Cruising Cutter | Cutter | Gillmer, Thomas C - Creator | Exact 06/01/1972 - 06/01/1972 | Plans for an Auxiliary Cruising Cutter. Drawing is a preliminary design study. | 26.000in - 35.000in | Image 1 | open CBMM page | |
| 2011.0002.0048.00 | Kenner Boat | Boat | Gillmer, Thomas C - Creator | Exact 05/05/1967 - 05/05/1967 | Plans for a Kenner Boat. Drawings depict a study sketch. | 24.750in - 28.250in | Image 1 | open CBMM page | |
| 2011.0002.0049.00 | Colonial American Bark 1650 | Not specified | Gillmer, Thomas C - Creator | Exact 02/19/1973 - 02/19/1973 | Plans for a Colonial American Bark 1650. Drawing is a preliminary study. | 18.250in - 23.250in | Image 1 | open CBMM page | |
| 2011.0002.0050.00 | 38' Buoy Boat | Boat | Gillmer, Thomas C - Creator | Exact 08/27/1971 - 08/27/1971 | Plans for a 38' Buoy Boat. Drawing is a conversion preliminary study and depicts an outboard profile. | 18.000in - 24.000in | Image 1 | open CBMM page | |
| 2011.0002.0052.00 | Hull Lines Plan | Not specified | Gillmer, Thomas C - Creator | Exact 07/15/1967 - 07/15/1967 | Hull Lines Plan for Wilmer M. Turner. | 23.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0053.00 | 34' Lobster Boat | Boat | Gillmer, Thomas C - Creator | Exact 05/07/1958 - 05/07/1958 | Plans for a 34' Lobster Boat. Drawing depicts the hull working lines. | 25.750in - 40.000in | Image 1 | open CBMM page | |
| 2011.0002.0054.00 | Modern Glass Hull Lobster Boat | Boat | Gillmer, Thomas C - Creator | Plans for a Modern Glass Hull Lobster Boat. Drawings depict the hull lines. On the reverse side, the drawing is labeled 'Alan McCullough'. | 14.000in - 24.250in | Image 1 | open CBMM page | ||
| 2011.0002.0055.00 | Yacht with Ketch Sail Rig | Ketch | Gillmer, Thomas C - Creator | Plans for an unlabeled Yacht with a Ketch Sail Rig. Drawing depicts the profile. | 26.500in - 30.500in | Image 1 | open CBMM page | ||
| 2011.0002.0056.00 | Yacht with Sloop Sail Rig | Sloop | Gillmer, Thomas C - Creator | Plans for an unlabeled Yacht with Sloop Sail Rig. Drawing depicts a study. | 30.250in - 27.500in | Image 1 | open CBMM page | ||
| 2011.0002.0057.00 | Motor Lobster Boat | Boat | Gillmer, Thomas C - Creator | Plans for a Motor Lobster Boat. Drawing depicts the sheer, body and half-breadth plans. | 20.500in - 30.750in | Image 1 | open CBMM page | ||
| 2011.0002.0058.00 | Dutch Dink | Not specified | Gillmer, Thomas C - Creator | Plans for a Dutch Dink. Drawing depicts a study. | 18.000in - 20.250in | Image 1 | open CBMM page | ||
| 2011.0002.0059.00 | 27' Sport Fisherman | Not specified | Gillmer, Thomas C - Creator | Plans for a 27' Sport Fisherman. Drawing depicts a profile study. | 12.000in - 26.750in | Image 1 | open CBMM page | ||
| 2011.0002.0016.01 | Design no. 250 Plan and Inboard Profile | Not specified | Gillmer, Thomas C - Creator | Exact 05/14/1960 - 05/14/1960 | Design no. 250 Plan and Inboard Profile. | 30.500in - 41.250in | Image 1 | open CBMM page | |
| 2011.0002.0016.03 | Design no. 250 Outboard Profile and Sections | Not specified | Gillmer, Thomas C - Creator | Exact 05/19/1960 - 05/19/1960 | Design no. 250 Outboard Profile and Sections. | 30.750in - 39.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.01 | D 610 Viking Ship: Preliminary Concept | Not specified | Gillmer, Thomas C - Creator | Exact 07/14/1980 - 07/14/1980 | D 610 Viking Ship: Preliminary Concept. | 19.250in - 28.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.02 | Same as 2011.2.32.2 / D 610 Viking Ship: Prelim. | Not specified | Gillmer, Thomas C - Creator | Exact 07/14/1980 - 07/14/1980 | Same as 2011.2.32.2 / D 610 Viking Ship: Prelim. Concept. | 25.750in - 37.250in | Image 1 | open CBMM page | |
| 2011.0002.0032.05 | D 610 Viking Ship: Lines 1st Draft | Not specified | Gillmer, Thomas C - Creator | Exact 09/10/1980 - 09/10/1980 | D 610 Viking Ship: Lines 1st Draft. | 19.750in - 36.750in | Image 1 | open CBMM page | |
| 2011.0002.0032.06 | Same as 2011.2.32.5 / D 610 Viking Ship: Lines | Not specified | Gillmer, Thomas C - Creator | Exact 09/10/1980 - 09/10/1980 | Same as 2011.2.32.5 / D 610 Viking Ship: Lines 1st Draft. | 26.500in - 52.000in | Image 1 | open CBMM page | |
| 2011.0002.0032.07 | D 610 Viking Ship: Lines Draft | Not specified | Gillmer, Thomas C - Creator | Exact 09/29/1980 - 09/29/1980 | D 610 Viking Ship: Lines Draft. | 24.000in - 47.000in | Image 1 | open CBMM page | |
| 2011.0002.0032.08 | D 610 Viking Ship: Table of Offsets | Not specified | Gillmer, Thomas C - Creator | Exact 10/09/1980 - 10/09/1980 | D 610 Viking Ship: Table of Offsets. | 25.750in - 49.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.09 | D 610 Viking Ship: Structural Body | Not specified | Gillmer, Thomas C - Creator | Exact 10/16/1980 - 10/16/1980 | D 610 Viking Ship: Structural Body. | 21.500in - 27.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.10 | D 610 Viking Ship: Structural Profile | Not specified | Gillmer, Thomas C - Creator | Exact 11/14/1980 - 11/14/1980 | D 610 Viking Ship: Structural Profile. | 23.500in - 46.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.11 | D 610 Viking Ship: Outboard Profile | Not specified | Gillmer, Thomas C - Creator | Exact 12/08/1980 - 12/08/1980 | D 610 Viking Ship: Outboard Profile. | 20.500in - 47.000in | Image 1 | open CBMM page | |
| 2011.0002.0032.12 | D 610 Viking Ship: Unlabeled Drawing of Section | Not specified | Gillmer, Thomas C - Creator | Exact 07/16/1980 - 07/16/1980 | D 610 Viking Ship: Unlabeled Drawing of a Section of the Ship. | 12.000in - 15.000in | Image 1 | open CBMM page | |
| 2011.0002.0032.13 | D 610 Viking Ship: Bow Illustration | Not specified | Gillmer, Thomas C - Creator | Range, Exa 07/01/1980 - 12/30/1980 | D 610 Viking Ship: Bow Illustration. | 5.000in - 11.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.14 | D 610 Viking Ship: Stern Illustration | Not specified | Gillmer, Thomas C - Creator | Range, Exa 07/01/1980 - 12/30/1980 | D 610 Viking Ship: Stern Illustration. | 5.000in - 12.000in | Image 1 | open CBMM page | |
| 2011.0002.0032.15 | D 600 Viking Ship: Unlabeled drawings of Stern | Not specified | Gillmer, Thomas C - Creator | Range, Exa 07/01/1980 - 12/30/1980 | D 600 Viking Ship: Unlabeled drawings of Stern. | 24.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0032.17 | D660 Norse 6 Oared Boat: Lines Draft | Boat | Gillmer, Thomas C - Creator | Exact 05/11/1981 - 05/11/1981 | D660 Norse 6 Oared Boat: Lines Draft. | 21.250in - 42.250in | Image 1 | open CBMM page | |
| 2011.0002.0032.18 | D 660 Norse 6 Oared Boat Offests Table | Boat | Gillmer, Thomas C - Creator | Exact 05/26/1981 - 05/26/1981 | D 660 Norse 6 Oared Boat Offests Table. | 24.000in - 45.500in | Image 1 | open CBMM page | |
| 2000.0038.0009.02 | 30' Ketch Seawind Class | Ketch | Gillmer, Thomas C - Creator | Exact 06/14/1969 - 06/14/1969 | Plans for the 30' Ketch Seawind Class, Design #240. Produced in fiberglass by Allied Boat Company. Vessel dimensions are overall length 30' 6", beam 9' 3", and draft 4' 4". The ketch Apogee, which is a boat in the Seawind Class, circumnavigated the globe from 1963-1968, the first fiberglass vessel to do so. This plan is a special headsail rig for Robert C. Lea, Jr. Esq. Drawing depicts a side view of the sails. At the bottom of the sheet is a stamp Thomas C. Gillmer, Naval Architect, 1 Shipwright Harbor, Annapolis Maryland. Material is graphite on paper. | 25.875in - 19.500in | 1 Shipwright Harbor - Annapolis - MD | Image 1 Image 2 | open CBMM page |
| 2000.0038.0009.03 | 30' Ketch Seawind Class | Ketch | Gillmer, Thomas C - Creator | Exact 06/14/1969 - | Plans for the 30' Ketch Seawind Class, Design #240. Produced in fiberglass by Allied Boat Company. Vessel dimensions are overall length 30' 6", beam 9' 3", and draft 4' 4". The ketch Apogee, which is a boat in the Seawind Class, circumnavigated the globe from 1963-1968, the first fiberglass vessel to do so. Plan is a pecial headsail rig for Robert C. Lea, Jr. Esq. Drawing depicts a side view of the sails. At the bottom of the sheet is a stamp for Thomas C. Gillmer, Naval Architect, 1 Shipwright Harbor, Annapolis Maryland. Mateial is graphite on paper. | 25.875in - 19.500in | 1 Shipwright Harbor - Annapolis - MD | Image 1 Image 2 | open CBMM page |
| 2000.0038.0004.01 | Pleasure Boat | Boat | Gillmer, Thomas C - Creator | Range, Exa 01/01/1948 - 12/31/1960 | Plans for a pleasure boat with a ketch rig and alternate deck support, Design #120 by Thomas C. Gillmer, Annapolis MD. One set of Plans A-J. Plan A depicts the working hull lines, dated 3/2/48. Plan B depicts the hull lines, dated 3/17/48. Plan C is the table of offsets and sections, dated 2/3/1948. Plan D is the sail and rigging plan, dated 1/26/48. Plan E is the construction plan, dated 2/20/48. Plan F is an alternate deck construction and cockpit construction, dated 8/1/60. Plan G depicts various construction sections, dated 2/48. Plan H is the accomodation plan, dated 2/48. Plan I depicts various sections, annex drawing 6, and sections between 5 and 6, dated 2/48. Plan J depicts the masting and spars, dated 2/14/48. Material is pencil on tracing paper for Plans A, C, F, G, and J; ink of tracing paper for Plans B, D, E, and H-I. | [H]23.375in - [W]36.75in | - Annapolis - MD | Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10 | open CBMM page |
| 2000.0038.0006.01 | Pleasure Boat | Boat | Gillmer, Thomas C - Creator | Range, Exa 01/01/1975 - 12/31/1980 | Plans for a pleasure boat with a sloop or ketch/cutter rig, Design #180AF by Thomas C. Gillmer, Annapolis MD. One set of Plans A-N. Plan A depicts the deck and trunk detail, dated 1/20/75. Plan B is the arrangement plan, dated 12/21/76. Plan C is the arrangement plan, dated 3/24/75. Plan D is the arrangement plan, dated 10/27/76. Plan E is the arrangement plan, dated 10/27/76. Plan F is the sail plan with a sloop rig alternate 2B, dated 1/24/75. Plan G is the sail plan, dated 10/27/76. Plan H is the sail plan, dated 1/27/75. Plan I is a ketch rig option, dated 9/20/76. Plan J is a ketch rig ption, dated 12/20/76. Plan K is a ketch rig option, dated 1/20/80. Plan L is a sail plan with a sloop rig alternate 2D, dated 3/11/77. Plan M is a sail plan alternate 2E with a tall cutter rig, dated 11/4/80. Plan N is the sail plan, dated 11/8/80. Material is pencil on vellum for Plans A, F, and L; ink on mylar for Plans B, C, E, G, H, J, K, and N; ink on plastic for Plan D; pencil on mylar for Plans I and M. | [H]24.875in - [W]39in | - Annapolis - MD | Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10 Image 11 Image 12 Image 13 Image 14 | open CBMM page |
| 2000.0038.0008.01 | 29' Motor Sailer Sea Horse | Motor sailer | Gillmer, Thomas C - Creator | Range, Exa 01/01/1958 - | Plans for the 29' Motor Sailer Sea Horse, a pleasure boat with cutter rig, Design #190 by Thomas C. Gillmer, Annapolis MD. Boat length is 29' 6". One set of Plans A-H. Plan A depicts the hull lines, dated 4/20/58. Plan B is the sail plan, dated 4/26/58. Plan C is the construction plan, dated 4/15/58. Plan D depicts various construction sections, dated 4/20/58. Plan E is the accomodation plan, dated 4/20/58. Plan F is the table of offsets, dated 3/28/58. Plan G is the spar and rigging plan, dated 4/1/58. Plan H depicts the working hull lines, dated 4/10/58. Material is ink on vellum for Plans A, B, and E; pencil on vellum for Plans C, D, F, G, and H. | [H]26in - [W]38.625in | - Annapolis - MD | Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 | open CBMM page |
| 2000.0038.0013.01 | 29' Fiberglass Ketch Wind and Wave | Ketch | Gillmer, Thomas C - Creator | Circa 01/01/1965 - | Plans for the 29' Fiberglass Ketch Wind and Wave, a pleasure boat with a ketch rig, Design #300F, by Thomas C. Gillmer, Annapolis MD. Boat length is 29' 6". One set of Plans A-H. Plan A is the hull lines draught, dated 7/30/65. Plan B is a rough sketch of the hull lines, undated. Plan C is the sail plan, dated 8/11/65. Plan D is the sail plan, dated 8/17/65. Plan E is the deck plan and structural details, dated 8/14/65. Plan F is the bow molding assembly, dated 8/27/65. Plan G depicts the structure and sections 5 and 6, dated 11/1/65. Plan H is section 3, undated. Material is pencil on vellum for Plans A, B, C, E, F, H; ink on vellum for Plan D; pencil on mylar for Plan G. | [H]24.5in - [W]39.5in | - Annapolis - MD | Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 | open CBMM page |
| 2011.0002.0014.02 | Yawl Blue Water | Yawl | Gillmer, Thomas C - Creator | Exact 05/24/1971 - 05/24/1971 | Plans for the Yawl Blue Water, Design No. 210. Drawings contain modifications for Mr. James Raymond.. Drawing depicts sections and the inboard profile, preliminary hull lines showing inside accomadations, and the stern. Drawing is marked as Sheet 3C. Material is red ink on paper. | 24.500in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0007.01 | Holiday | Not specified | Gillmer, Thomas C - Creator | Circa 09/01/1944 - 09/01/1944 | Plans for the Holiday. Design No. 20. Drawing depicts the hull lines. Material is blue drafting paper. | 25.750in - 33.500in | Image 1 Image 2 | open CBMM page | |
| 2011.0002.0008.02 | Thornycroft R.F.G | Not specified | Gillmer, Thomas C - Creator | Exact 11/06/1959 - 11/06/1959 | Plans for the Thornycroft R.F.G., Design 23T. Drawing depicts two perspectives of the hull. Similar to the drawing at 2011.0002.0008.01. Printed on plastic. | 22.250in - 26.250in | Image 1 | open CBMM page | |
| 2011.0002.0008.03 | Thornycroft R.F.G. | Boat | Gillmer, Thomas C - Creator | Exact 11/06/1959 - 11/06/1959 | Plans for the Thornycroft R.F.G, Design 23T. Drawing depicts the hull lines and a profile of the boat lightly sketched in. Material is paper. | 19.750in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0008.01 | Thornycroft R.F.G. | Not specified | Gillmer, Thomas C - Creator | Exact 11/06/1959 - 11/06/1959 | Plans for Design 23T Accomodations Thornycroft R.F.G. Drawing depicts two perspectives of the hull. Material is paper. | 29.500in - 34.750in | Image 1 | open CBMM page | |
| 2011.0002.0008.04 | Thornycroft R.F.G. | Not specified | Gillmer, Thomas C - Creator | Exact 11/08/1959 - 11/08/2959 | Plans for the Thornycroft R.F.G., Design No. 23T. Drawing depicts the molded hull by outboard profile Sheet One. Drawing is similar to 2011.0002.0008.03. Material is printed on plastic. | 19.750in - 37.750in | Image 1 | open CBMM page | |
| 2011.0002.0009.02 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 10/01/1945 - 10/31/1945 | Plans for the Ketch Calypso, Design No. 60. Drawings depict the construction #2 plan and deck plan. Material is paper. | 18.000in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.03 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 03/01/1945 - 03/31/1945 | Plans for the Ketch Calypso, Design No. 60. Drawings depict the accomodation plan and inboard profile. | 24.750in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.04 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 10/01/1945 - 10/31/1945 | Plans for the Ketch Calypso, Design No. 60. Drawing depicts the Table of Offsets. | 21.500in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.06 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 12/01/1945 - 12/30/1945 | Plans for the Ketch Calypso, Design No. 60. Plans show an alternate arrangement for Mr. Desmond Holdridge. Drawings show two perspectives of the hull. | 24.500in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.07 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 03/01/1945 - 03/31/1945 | Plans for the Ketch Calypso, Design No. 60. Drawings depict the hull lines. Hull lines show three perspectives of the hull. | 24.250in - 35.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.08 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 12/01/1945 - 12/30/1945 | Plans for the Ketch Calypso, Design No. 60. Plans are drawn for Mr. Holdridge. Drawings depict an alternate accomodation. | 36.750in - 21.750in | Image 1 | open CBMM page | |
| 2011.0002.0009.09 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 02/01/1948 - 02/28/1948 | Plans for the Ketch Calypso, Design No. 60. Plans drawn for Mr. Enrique Gutierrez. Drawings depict the profile of the hull and details for the engine installation. | 14.000in - 35.000in | Image 1 | open CBMM page | |
| 2011.0002.0009.10 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Exa 11/01/1945 - 11/30/1945 | Plans for the Ketch Calypso, Design No. 60. Drawings depict the construction #1 plan and various sections. | 25.500in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0009.13 | Ketch Calypso | Ketch | Gillmer, Thomas C - Creator | Range, Cir 11/01/1945 - 11/30/1945 | Plans for the Ketch Calypso, Design No. 60. Drawings depict the masting and spars. | Image 1 | open CBMM page | ||
| 2011.0002.0010.01 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/25/1945 - 08/25/1945 | Plans for a Double Ended Sloop, Design No. 70. Drawings depict the hull lines and shows two perspectives of the hull. | 28.000in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0010.02 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Cir 08/01/1945 - 08/30/1945 | Plans for a Double Ended Sloop, Design No. 70. Drawing depicts a hull profile. | 23.000in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0010.03 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/26/1945 - 08/26/1945 | Plans for a Double Ended Sloop, Design No. 70. Drawing depicts the Table of Offsets. | 19.000in - 31.250in | Image 1 | open CBMM page | |
| 2011.0002.0010.04 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 07/25/1945 - 07/25/1945 | Plans for a Double Ended Sloop, Design No. 70. Drawing is a hull lines draught and is a light pencil sketch of the hull in three perspectives. | 21.750in - 34.000in | Image 1 | open CBMM page | |
| 2011.0002.0010.06 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 09/02/1945 - 09/02/1945 | Plans for a Double Ended Sloop, Design No. 70. Drawings depict the arrangement plan and profile. | 27.000in - 32.000in | Image 1 | open CBMM page | |
| 2011.0002.0010.08 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Cir 08/01/1945 - 09/30/1945 | Plans for a Double Ended Sloop, Design No.70 . Drawing depicts the deck plan. | 17.750in - 36.250in | Image 1 | open CBMM page | |
| 2011.0002.0010.11 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/23/1957 - 01/23/1957 | Plans for a Double Ended Sloop, Design No. 70B. Drawing depicts working lines. Material is printed on thick paper. | 24.000in - 36.750in | Image 1 | open CBMM page | |
| 2011.0002.0010.12 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 02/14/1957 - 02/14/1957 | Plans for a Double Ended Sloop, Design No. 70B. Drawing depicts the construction plan, profile, deck str., frames. Printed on thick paper. | 23.500in - 30.750in | Image 1 | open CBMM page | |
| 2011.0002.0011.06 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/15/1955 - 01/15/1955 | Plans for a Cruising Sloop, Design No.80. Drawing depicts the accomodation plan. This is a modification of Plan #1 dated March 1946 (see 2011.0002.0011.04). | 15.750in - 28.000in | Image 1 | open CBMM page | |
| 2011.0002.0011.09 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/14/1955 - 01/14/1955 | Plans for a Cruising Sloop, Design No. 80. Drawings depict the port inboard profile, starboard inboard profile, and section 5 accomodations plan. Drawing is identified as Annex 3. | 18.000in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0011.02 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Exa 01/01/1946 - 12/30/1946 | Plans for a Cruising Sloop, Design No. 80. Drawings depict a construction and deck plans. | 23.750in - 34.000in | Image 1 | open CBMM page | |
| 2011.0002.0011.04 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Exa 03/01/1946 - 03/31/1946 | Plans for a Cruising Sloop, Design No. 80. Drawings depict the hull lines. | 22.750in - 33.750in | Image 1 | open CBMM page | |
| 2011.0002.0011.12 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Exa 06/30/1956 - 06/30/1956 | Plans for a Cruising Sloop, Design No. 80. Drawings depict the offset table and construction section. | 23.500in - 34.000in | Image 1 | open CBMM page | |
| 2011.0002.0011.05 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 07/04/1946 - 07/04/1946 | Plans for a Cruising Sloop, Design No. 80. Drawing depicts a spar plan with a gaff yawl rig. | 20.500in - 21.500in | Image 1 | open CBMM page | |
| 2011.0002.0011.07 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 12/28/1954 - 12/28/1954 | Plans for a Cruising Sloop, Design No. 80 Rigging. Drawings depict the rigging terminal fittings. There is a note stating the drawing is an annex to sketch 1. | 18.000in - 13.000in | Image 1 | open CBMM page | |
| 2011.0002.0011.08 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/14/1955 - 01/14/1955 | Plans for a Cruising Sloop, Design No. 80. Drawings depict a section at 7 1/2, companionway side view, and a skylight section. Drawing is identified as Annex 2. | 14.250in - 23.750in | Image 1 | open CBMM page | |
| 2011.0002.0011.11 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Range, Cir 01/01/1955 - 12/30/1955 | Plans for a Cruising Sloop, Design No. 80. Drawing depicts the spreader | 6.500in - 9.500in | Image 1 | open CBMM page | |
| 2011.0002.0011.13 | Cruising Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 02/15/1955 - 02/15/1955 | Plans for a Cruising Sloop, Design No. 80. Drawings depict the rudder DTL, chain plate, chain late assembly, and alternate ballast iron. Drawing is identified as Annex 5. | 17.000in - 24.000in | Image 1 | open CBMM page | |
| 2011.0002.0012.02 | Utility Day Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 04/04/1957 - 04/04/1957 | Plans for a Utility Day Cruiser, Design No. 170. Drawing depicts the accomodation plan. | 18.000in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0012.03 | Utility Day Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 04/15/1957 - 04/15/1957 | Plans for a Utility Day Cruiser, Design No.170. Drawing depicts the hull lines. | 18.000in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0012.04 | Utility Day Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 06/30/1957 - 06/30/1957 | Plans for a Utility Day Cruiser, Design No.170. Drawings depict the construction plan with a nnotatations of the entire hull and specific sections. | 18.000in - 25.000in | Image 1 | open CBMM page | |
| 2011.0002.0013.01 | Redwine | Not specified | Gillmer, Thomas C - Creator | Exact 06/25/1957 - 06/25/1957 | Plans for the Redwine, Design No. 180. Drawing is a preliminary design depicting the sail plan, outboard profile, middle sections, and deck plan. | 26.000in - 35.500in | Image 1 | open CBMM page | |
| 2011.0002.0013.02 | Redwine | Not specified | Gillmer, Thomas C - Creator | Circa 06/01/1957 - 06/30/1957 | Plans for the Redwine, Design No. 180. Drawing depicts the hull lines through three perspectives of the hull. | 28.500in - 36.750in | Image 1 | open CBMM page | |
| 2011.0002.0015.04 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 09/19/1959 - 09/19/1959 | Plans for a Fiberglass Sloop,Design No. 220. Drawings depict various structural sections, profile, and plan. | 29.000in - 35.500in | Image 1 | open CBMM page | |
| 2011.0002.0015.01 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/04/1959 - 08/04/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict a preliminary accommodations layout, plan, and sample sections. | 16.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0015.05 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 09/30/1959 - 09/30/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict the accommodations plan, profile, and plan. | 29.250in - 38.000in | Image 1 | open CBMM page | |
| 2011.0002.0015.06 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 11/24/1959 - 11/24/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict the offset table and profile offsets. | 23.000in - 30.000in | Image 1 | open CBMM page | |
| 2011.0002.0015.07 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Circa 11/01/1959 - 11/01/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict the structure and detail. | 23.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0015.08 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Circa 01/01/1959 - 12/31/1959 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict hull lines in three perspectives. | 28.250in - 36.000in | Image 1 | open CBMM page | |
| 2011.0002.0015.10 | Fiberglass Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/14/1963 - 08/14/1963 | Plans for a Fiberglass Sloop, Design No. 220. Drawings depict an alternate deck plan and cabin plan. | 24.000in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.02 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/02/1961 - 01/02/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawings depict the hull lines and offsets. | 29.250in - 36.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.03 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/02/1961 - 01/02/1961 | Plans for an Auxiliary Sloop, Design No. 220. Drawing depicts the hull lines. It is similar to 2011.0002.0017.02, except it's printed on plastic. | 20.750in - 37.000in | Image 1 | open CBMM page | |
| 2011.0002.0017.04 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/20/1961 - 01/20/1960 | Plans for an Auxiliary Sloop, Design No.270. Drawings depict the accomodations plan and profile. | 24.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.05 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 02/20/1961 - 02/20/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawings depict details for the stem plate, centerline board, rigging plates, rudder heel socket, rudder post, and different centerboard drums. | 14.500in - 25.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.07 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 02/17/1961 - 02/17/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawings depict the hardware, accessories, profile of hull marked with numbers, and numbered list of corresponding hardware and accessories. | 20.000in - 21.250in | Image 1 | open CBMM page | |
| 2011.0002.0017.08 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 08/09/1961 - 08/09/1961 | Plans for an Auxiliary Sloop, Design No.270. Drawing is identified as detail sheet and depicts the ice box, rail, etc. | 30.250in - 24.250in | Image 1 | open CBMM page | |
| 2011.0002.0017.09 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 04/27/1961 - 04/27/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawings depict the spar and rigging detail. | 24.000in - 30.250in | Image 1 | open CBMM page | |
| 2011.0002.0017.10 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Exact 01/24/1961 - 01/24/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawings depict the construction plan, profile and sections. | 24.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.11 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Circa 01/01/1961 - 12/31/1931 | Plans for an Auxiliary Sloop, Design No. 270. Drawing is a sketch of an engine. | 10.000in - 16.500in | Image 1 | open CBMM page | |
| 2011.0002.0017.12 | Auxiliary Sloop | Sloop | Gillmer, Thomas C - Creator | Circa 01/01/1961 - 12/30/1961 | Plans for an Auxiliary Sloop, Design No. 270. Drawing depicts the hull lines in three perspectives of the hull. | 33.250in - 19.500in | Image 1 | open CBMM page | |
| 2011.0002.0021.01 | 35' Motor Sailer | Motor sailer | Gillmer, Thomas C - Creator | Exact 05/29/1969 - 05/29/1969 | Plans for a 35' Motor Sailer, Design No. 390. Drawings depict hull module studies and includes three small hull lines drawings of sailboats. A larger hull line drawing depicts a hull given in three perspectives (side, rear, top). | 23.000in - 29.250in | Image 1 | open CBMM page | |
| 2011.0002.0024.02 | 44' Ketch | Ketch | Gillmer, Thomas C - Creator | Exact 09/10/1977 - 09/10/1977 | Plans for a 44' Ketch, Design No. 510. Drawing is a preliminary study depicting the arrangement plan and deck layout. | 19.000in - 42.000in | Image 1 | open CBMM page | |
| 2011.0002.0024.03 | 44' Ketch | Ketch | Gillmer, Thomas C - Creator | Exact 09/02/1977 - 09/02/1977 | Plans for a 44' Ketch, Design No. 510. Drawing is identified as Sheet 1 and depicts the preliminary hull lines in three perspectives. | 41.000in - 24.500in | Image 1 | open CBMM page | |
| 2011.0002.0018.01 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 06/14/1962 - 06/14/1962 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawing depicts the preliminary design of a two-masted auxiliary ketch. | 21.750in - 30.750in | Image 1 | open CBMM page | |
| 2011.0002.0018.02 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Circa 06/01/1962 - 06/30/1962 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-masted Auxiliary Ketch). Drawings depict the accomodation plan. <CR>Unlabeled sketch of hull showing some of boat's accomodations. | 8.500in - 14.750in | Image 1 | open CBMM page | |
| 2011.0002.0018.03 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Circa 06/01/1962 - 06/30/1962 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawings depict the hull lines in two perspectives. | 24.250in - 42.250in | Image 1 | open CBMM page | |
| 2011.0002.0018.05 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 07/15/1963 - 07/16/1963 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawings are a preliminary study and depcit the plan, profile, and trial midsection. | 19.500in - 29.250in | Image 1 | open CBMM page | |
| 2011.0002.0018.06 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 01/09/1964 - 01/09/1964 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawings depict the accomodations plan and profile. | 18.250in - 26.500in | Image 1 | open CBMM page | |
| 2011.0002.0018.07 | 28' Utility Sport Cruiser | Cruiser | Gillmer, Thomas C - Creator | Exact 02/22/1964 - 02/22/1964 | Plans for a 28' Utility Sport Cruiser, Design No. 310 (Two-Masted Auxiliary Ketch). Drawing is the construction plan. | 29.500in - 39.750in | Image 1 | open CBMM page | |
| 2011.0002.0020.01 | 41' Motor Sailer | Motor sailer | Gillmer, Thomas C - Creator | Exact 04/21/1967 - 04/21/1961 | Plans for a 41' Motor Sailer, Design No. 371. Drawing depicts a preliminary study. | 26.000in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0025.01 | 44' Ketch | Ketch | Gillmer, Thomas C - Creator | Exact 12/01/1977 - 12/01/1977 | Plans for a 44' Ketch, Design No. 520. Drawing depicts the preliminary hull lines. | 27.750in - 43.000in | Image 1 | open CBMM page | |
| 2011.0002.0025.03 | 44' Ketch | Ketch | Gillmer, Thomas C - Creator | Exact 12/02/1977 - 12/02/1977 | Plans for a 44' Ketch, Design No. 520. Drawing depicts a preliminary profile and sail plan. It is the same as 2011.0002.0025.02, except it's printed on plastic. | 28.000in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0025.04 | 44' Ketch | Ketch | Gillmer, Thomas C - Creator | Exact 12/07/1977 - 12/07/1977 | Plans for a 44' Ketch, Design No. 520. Drawings depict a preliminary study and accomodations plan. | 17.000in - 41.500in | Image 1 | open CBMM page | |
| 2011.0002.0026.01 | HMS Druid | Not specified | Gillmer, Thomas C - Creator | Exact 02/18/1978 - 02/18/1978 | Plans for the HMS Druid, Design No. 530. Drawing depict the hull lines. | 27.000in - 45.000in | Image 1 | open CBMM page | |
| 2011.0002.0026.02 | HMS Druid | Not specified | Gillmer, Thomas C - Creator | Exact 03/18/1978 - 03/18/1978 | Plans for the HMS Druid, Design No. 530. Drawings depict the structural profile and section. | 27.500in - 47.750in | Image 1 | open CBMM page | |
| 2011.0002.0026.04 | HMS Druid | Not specified | Gillmer, Thomas C - Creator | Range, Exa 02/01/1978 - 03/31/1978 | Plans for the HMS Druid, Design No. 530. Drawings depict the hull lines. | 10.750in - 39.250in | Image 1 | open CBMM page | |
| 2011.0002.0033.02 | 38' Cruising Ketch | Ketch | Gillmer, Thomas C - Creator | Range, Exa 01/01/1983 - 12/30/1983 | Plans for a 38' Cruising Ketch, Design #630. Drawings depict the sheer, body, and half-breadth plans. | 24.000in - 36.000in | Image 1 | open CBMM page | |
| 2011.0002.0033.03 | 38' Cruising Ketch | Ketch | Gillmer, Thomas C - Creator | Range, Exa 01/01/1983 - 12/30/1983 | Plans for a 38' Cruising Ketch, Design #630. Drawing is the accomodation plan study. | 23.250in - 40.000in | Image 1 | open CBMM page | |
| 2011.0002.0034.02 | Allied Seawind III | Not specified | Gillmer, Thomas C - Creator | Exact 12/07/1980 - 12/07/1980 | Plans for the Allied Seawind III, Design #640. Drawing is the accomodation plan. | 22.750in - 42.750in | Image 1 | open CBMM page | |
| 2011.0002.0034.03 | Allied Seawind III | Not specified | Gillmer, Thomas C - Creator | Exact 01/06/1981 - 01/06/1981 | Plans for the Allied Seawind III, Design #640. Drawing depicts the outboard profile. | 30.500in - 29.500in | Image 1 | open CBMM page | |
| 2011.0002.0034.04 | Allied Seawind III | Not specified | Gillmer, Thomas C - Creator | Exact 01/09/1981 - 01/09/1981 | Plans for the Allied Seawind III, Design #640. Drawings depict the arrangement plan and profile. | 30.500in - 43.000in | Image 1 | open CBMM page | |
| 2011.0002.0034.05 | Allied Seawind III | Not specified | Gillmer, Thomas C - Creator | Exact 01/23/1981 - 01/23/1981 | Plans for the Allied Seawind III, Design #640. Drawings depict the sheer, body and half-breadth draft plans. | 30.500in - 41.750in | Image 1 | open CBMM page | |
| 2011.0002.0035.01 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Exact 03/20/1974 - 03/20/1974 | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction profile from fresco at Isle of Thera. | 20.500in - 36.500in | Image 1 | open CBMM page | |
| 2011.0002.0035.02 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Exact 03/20/1974 - 03/20/1974 | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction profile from fresco at Isle of Thera. Drawing is similar to 2011.0002.0035.01. | 22.500in - 36.500in | Image 1 | open CBMM page | |
| 2011.0002.0035.03 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction from fresco at Isla of Thera. Drawing is a rough sketch of the ship and its dimensions. | 21.000in - 30.000in | Image 1 | open CBMM page | ||
| 2011.0002.0035.04 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Exact 02/17/1982 - 02/17/1982 | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction from fresco at Isle of Thera. Drawing depicts the preliminary draft of the sheer, body and half-breadth plans. | 17.500in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0035.05 | Akrotiri Ship | Not specified | Gillmer, Thomas C - Creator | Exact 02/17/1982 - 02/17/1982 | Plans for the Akrotiri Ship, Design #670. Drawing is the first reconstruction from fresco at Isle of Thera. Drawings depict the draft sheer, body, and half-breadth plans. | 18.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.01 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 04/09/1977 - 04/09/1977 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the outboard rofiles and draft of the hull lines. | 30.000in - 45.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.02 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/31/1976 - 10/31/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the propeller aperature profile. | 15.250in - 10.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.03 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 11/15/1975 - 11/15/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the deck plan and outboard profile. | 20.250in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.05 | Pride of Baltimore | Yawl | Gillmer, Thomas C - Creator | Exact 02/21/1976 - 02/21/1976 | Plans for the Pride of Baltimore, Design No. 475. Drawings depict the 17' Yawl Boat Hull Lines. | 18.250in - 24.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.06 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/18/1976 - 10/18/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the arrangement plan. | 27.500in - 41.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.07 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/12/1983 - 10/12/1983 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the jib boom taper diagram. | 8.750in - 15.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.08 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 11/08/1975 - 11/08/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the structural sections. | 27.500in - 41.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.09 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 11/20/1975 - 11/20/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the spar and rigging plan. | 27.500in - 40.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.11 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/18/1976 - 10/18/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the arrangement plan. Drawing is the same as 2011.0002.0022.06. | 27.000in - 41.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.12 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 06/11/1975 - 06/11/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the hydrostatic curves. | 14.750in - 31.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.13 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 12/24/1975 - 12/24/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the outboard profiles. | 27.000in - 45.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.14 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 01/22/1976 - 01/22/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the rudder and hull structural detail. | 25.000in - 34.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.15 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 09/08/1976 - 09/08/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the deck detail. | 24.500in - 22.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.16 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 12/12/1975 - 12/12/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the armament detail. | 18.250in - 24.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.17 | Pride of Baltimore | Yawl | Gillmer, Thomas C - Creator | Exact 03/21/1976 - 03/21/1976 | Plans for the Pride of Baltimore, Design No. 475. Drawings depicting the 17' Yawl Boat Structure. | 18.500in - 25.750in | Image 1 | open CBMM page | |
| 2011.0002.0022.18 | Pride of Baltimore | Yawl | Gillmer, Thomas C - Creator | Exact 02/24/1976 - 02/24/1976 | Plans for the Pride of Baltimore, Design No. 475. Drawings depicting the 17' Yawl Boat hull lines. | 20.500in - 27.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.19 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 12/11/1975 - 12/11/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the bow sprit assembly detail. | 22.750in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.20 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 12/08/1975 - 12/08/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the chain late and channel detail. | 20.000in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.21 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 11/08/1975 - 11/08/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing is identified as Sheet 2 and depicts the structural sections. | 26.750in - 41.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.22 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 04/01/1976 - 04/01/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the standing rigging and arrangement detail. | 25.500in - 43.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.23 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/23/1975 - 10/23/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the lines draft. | 27.250in - 43.000in | Image 1 | open CBMM page | |
| 2011.0002.0022.24 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/18/1976 - 10/18/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the arrangement plan. | 18.000in - 28.250in | Image 1 | open CBMM page | |
| 2011.0002.0022.26 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 10/29/1975 - 10/29/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the hull lines. | 16.000in - 42.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.27 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 11/26/1981 - 11/26/1981 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the dolphin striker. | 19.250in - 30.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.28 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 07/30/1975 - 07/30/1975 | Plans for the Pride of Baltimore, Design No. 470. Drawing depicts the original design sections. | 8.750in - 11.500in | Image 1 | open CBMM page | |
| 2011.0002.0022.29 | Pride of Baltimore | Not specified | Gillmer, Thomas C - Creator | Exact 04/01/1976 - 04/01/1976 | Plans for the Pride of Baltimore, Design No. 470. Drawings depict the standing rigging arrangement and detail. | 26.000in - 41.000in | Image 1 | open CBMM page | |
| 2000.0038.0007.01 | Pleasure Boat | Boat | Gillmer, Thomas C - Creator | Range, Exa 01/01/1979 - 12/31/1982 | Plans for a pleasure boat with a sloop rig, Design #180RNB by Thomas C. Gillmer, Annapolis MD. One set of Plans A-I. Plan A depicts the working hull lines, dated 9/24/79. Plan B is a draught of the hull lines, dated 10/6/79. Plan C is a draught of the hull lines for new hull 2, dated 3/12/82. Plan D is the offset table, dated 10/4/79. Plan E is the table of offsets for new hull 2, dated 3/22/82. Plan F is the structural profile for the new hull configuration, dated 10/31/79. Plan G is the sail plan alternate 2E, dated 9/27/79. Plan H is the sail plan for alternate 2E, dated 9/27/79. Plan I is a rough drawing of the hull lines, undated. Material is pencil on vellum for Plans A and F; pencil on mylar for Plans B, C, G, and I; ink on mylar for Plans D, E, and H. | [H]25.25in - [W]37.625in | - Annapolis - MD | Image 1 Image 2 Image 3 Image 4 Image 5 Image 6 Image 7 Image 8 Image 9 Image 10 Image 11 Image 12 Image 13 Image 14 | open CBMM page |
| 2011.0002.0010.05 | Double Ended Sloop | Sloop | Gillmer, Thomas C - Creator | 1/9/1945-5/12/1955 | Plans for a Double Ended Sloop, Design No. 70. Drawings depict the construction Plan, profile, deck frame, frames and flrs. Originally drawn on 1/9/45, and subsequently redrawn on 5/12/55. | 23.000in - 34.750in | Image 1 | open CBMM page |