| Catalog # | Title | Boat Type | Artist/Maker | Date Made | Description | Dimensions | Place Made | Full Image | CBMM Cat. Page |
|---|---|---|---|---|---|---|---|---|---|
| 1995.0011.0001.01 | 70' Motor Yachts Lunaria, Lanai, and Calabash | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Range, Cir 01/01/1911 - 12/31/1912 | Plans for Trumpy Yacht Design, Contracts #15 (Lunaria), #16 (Lanai), and #24 (Calabash). Built between 1911-1912. Drawings depict the body plan. Contracts 15-16 have corrections. Material is pencil and ink on cardboard. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0002.01 | 85' Motor Yacht Enchantress III | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Circa 01/01/1921 - 12/31/1921 | Plans for Trumpy Yacht Design, Contract #121. Built in 1921. Drawing depicts the body plan. Material is heavy cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0003.01 | 75' Motor Yacht Amitie | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Circa 01/01/1921 - 12/31/1921 | Plans for Trumpy Yacht Design, Contract #124. Built in 1921. Drawing depicts the body plan. Material is cardstock. | - Camden - VA | open CBMM page | ||
| 1995.0011.0004.01 | 85' Motor Yacht Coconut | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1924 | Plans for Trumpy Yacht Design, Contract #139. Built in 1924. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0002.02 | 85' Motor Yacht Enchantress III | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1921 | Plans for Trumpy Yacht Design, Contract #121. Built in 1921. One set of Plans A-B. Plan B is a torn left section from Plan A. Plan A is the remainder of the plan. Drawing depicts the transom and sheer lines. Material is heavy cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0005.01 | 98' Motor Yacht Alscotia | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1924 | Plans for Trumpy Yacht Design, Contract #157. Built in 1924. One set of Plans A-D. Plan A depicts the rudder assembly. Plans B-D are xerox copies of Plan A. Scale is 1" = 1'. Material is coated cloth for Plan A; xerox copies for Plans B-D. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0006.01 | 95' Motor Yacht Samurai | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1925 | Plans for Trumpy Yacht Design, Contract #173. Built in 1925. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0007.01 | 70' Motor Yacht Burlington | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Circa 01/01/1926 - 12/31/1926 | Plans for Trumpy Yacht Design, Contract #178. Built in 1926. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0008.01 | 103' Motor Yacht Freedom and 104' Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1925-1926 | Plans for Trumpy Yacht Design, Contracts #181 (Freedom) and #183 (Truant). Built in 1925-1926. Drawing depicts the body Plan. Tracing made from original pencil drawing of December 22, 1942. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0009.01 | 93' Motor Yachts Summer Girl and Eala and 94' Motor Yacht Dixie Bell | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contracts #182 (Summer Girl), #184 (Eala), and #186 (Dixie Bell). Built in 1927. Drawing depicts the body plan. Material is blueprint. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0011.01 | 95' Diesel Yacht Nicoya | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #189. Built in 1927. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0012.01 | 126' Diesel Yacht Daydream | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #190. Built in 1927. Drawing depicts the hull lines. Material is cardboard. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0012.02 | 126' Diesel Yacht Daydream | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #190. Built in 1927. Drawing depicts the rudder bearing casting. Material is coated fabric. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0012.03 | 126' Diesel Yacht Daydream | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #190. Built in 1927. Drawing depicts the tie rod forging. Material is coated fabric. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0013.01 | 125' Diesel Yacht Waleada | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 03/25/1928 - | Plans for Trumpy Yacht Design, Contract #192. Built in 1928. Drawing depicts the C.I. bevel gear housing for a six horsepower steerer. Material is coated fabric. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0013.02 | 125' Diesel Yacht Waleada | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1928 | Plans for Trumpy Yacht Design, Contract #192. Built in 1928. Drawing depicts the molded body plan. Obscure, unidentified sketching on back. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0013.03 | 125' Diesel Yacht Waleada | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1928 | Plans for Trumpy Yacht Design, Contract #192. Built in 1928. Drawing depicts the molded body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0014.01 | 81' Diesel Yacht Elsie Fenimore | Yacht | Mathis Yacht Building Co., - Builder; Trumpy, Johan - Designer | 1928 | Plans for Trumpy Yacht Design, Contract #193. Built in 1928. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0015.01 | 85' Motor Yacht Lanai | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #194. Built in 1927. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0016.01 | 98' Motor Yacht Mariposa | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1928 | Plans for Trumpy Yacht Design, Contract #195. Built in 1928. Drawing depicts the rudder palms. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0016.02 | 98' Motor Yacht Mariposa | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 05/15/1928 - | Plans for Trumpy Yacht Design, Contract #195. Built in 1928. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0017.01 | Motor Yachts | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 02/16/1943 - | Plans for Trumpy Yacht Design, Contracts #197 (Saunterer), #198 (Viator), #201 (Memory/Lela), #206 (Lanakila/Ellenar), #208 (Mono/Carita), and #210 (Minnoco/Idyl). Drawings depict sections of the body mold lines. Material is blueprint copied on February 16, 1943, but depicts yachts constructed in 1928, 1929, and 1930. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0018.01 | 98' Motor Yacht Saunterer | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1930 | Plans for a Trumpy Yacht Design, Contract #197. Built in 1930. Drawing depicts a Pullman Berth-Deck House, starboard same - other hand. Written in pencil at the bottom of the sheet is "Not used, see revision." Material is tracing paper/mylar. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0019.01 | 106' Motor Yacht Viator | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1929 | Plans for a Trumpy Yacht Design, Contract #198. Built in 1929. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0020.01 | 110' Motor Yacht Maemere | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1929 | Plans for a Trumpy Yacht Design, Contract #199. Built in 1929. Drawing depict after body outside lines. Material is cardstock. | - Camden - NJ | Image 1 | open CBMM page | |
| 1995.0011.0021.01 | 101' Motor Yacht Dream Girl | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1929 | Plans for a Trumpy Yacht Design, Contract #200. Built in 1929. Drawings depict the aft body lines for two different sterns - a transom stern dated 3/29/1929 and a round/cruiser stern dated 3/15/1929. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0021.02 | 101' Motor Yacht Dream Girl | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Range, Cir 03/15/1929 - 03/29/1929 | Plans for a Trumpy Yacht Design, Contract #200. Built in 1929. Drawing depicts the aft body lines for a transom stern. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0021.03 | 101' Motor Yacht Dream Girl | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1929 | Plans for a Trumpy Yacht Design, Contract #200. Built in 1929. One set of Plans A-D. Plan A depicts the deck layout for the main deck and lower berth deck. Plans B-D depict the deck plan and a cabin plan. Material is coated fabric for Plan A; ink on paper for Plans B-D. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0021.04 | 101' Motor Yacht Big Pebble | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 04/28/1943 - | Plans for a Trumpy Yacht Design, Contract #200. Built in 1929. Drawing depicts the body plan. The Dream Girl was renamed to Big Pebble in this drawing. The sheet was retraced in April of 1943, but used on yacht build in 1929. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0022.01 | "Plan (1 copy)<br />Add to title 101' Motor Yacht Big Pebble<br />80' Express Cruiser Sahlou | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 04/24/1929 - | Plans for a Trumpy Yacht Design, Contract #202. Built in 1929. Drawing depicts the body plan. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0023.01 | "Plan (1 copy)<br />Add to title 101' Motor Yacht Big Pebble<br />101' Motor Yacht Silver Moon II | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1930 | Plans for a Trumpy Yacht Design, Contract #203. Built in 1930. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0024.01 | 85' Motor Yacht Tech Jr. | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 08/16/1929 - | Plans for a Trumpy Yacht Design, Contract #205. Built in 1930. Drawing depicts a body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0025.01 | 103' Motor Yacht Lanakila and 106' Mono | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 01/25/1929 - | Plans for a Trumpy Yacht Design, Contracts #206 (Lanakila) and #208 (Mono). Built in 1929. Drawing depicts the steel bulkhead at frame #6. Material is tracing paper incapsulated in mylar. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.01 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the locker and passage doors in the crew's quarters. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.02 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the transom seat, forecastle and port side. Building material was ash. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.03 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the transom and bureau in the cook and steward room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.04 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the proposed plan for the mantel in the dining room. Material is coated fabric. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.05 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the galley dresser on the starboard side. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.06 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the bureau in stateroom #3 on the starboard side." | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.08 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the port side of the pantry and owner's room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.09 | Motor Yacht Truant | Motor yacht | Mathis Yacht Building Co., - Builder; Trumpy, Johan - Designer | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the doors and mantel stiles at the forward end of the house. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.10 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the owner's stateroom passage on the starboard side. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.11 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the interior deckhouse panel on the starboard side. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.13 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/8" single and D.F. panelled bulkhead at frame #50 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.14 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the dumb waiter door, the pantry dresser on the starboard side, and the dish locker over the pantry dresser. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.15 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the stern and side profile. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.16 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/8" fore and aft passage bulkhead (on deck). Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.17 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the furniture in the engineers room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.18 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the radiator grille at the stairway. Material is on tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.19 | Trumpy Yacht Design, Contract 207 Bulkhead | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "7/8" S.F. Panel Bulkhead on Frame #40 - Looking Aft," on tracing paper. | open CBMM page | ||||
| 1995.0011.0026.20 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder; Kolb, Louis J. - Packed by; Chrysler, Walter P. - Packed by | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the seat in the smoking room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.21 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the hollow signal mast made of spruce. Material is tracing paper for copy 1 and blueprint for copy 2. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.22 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the ladder to the boat deck. Two are required, one for port and one for starboard. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.23 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder; Mandel, Leon - Photographer | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the screen bottom retainers on the top rail of the deck house sash. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.24 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts a 7/8" S.F. panel bulkhead at frame #40 looking forward. Material is tracing paper. Paper has split into two halves. Each half is labeled with the accession number, followed by an "a" to denote the top half and "b" to denote the bottom half. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.25 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the bureau and wardrobe in the captains room in the pilothouse. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.26 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the toilet bulkheads, the captains room. Material is tracing paper. Paper is in two sections. The sections are labled with the accession number, followed by "a" to denote the major portion of the paper, and "b" to denote the small portion that has been removed which consists of only the description of the plan itself. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.27 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the sofa seat in stateroom #2. Material is tracing paper. Paper is in two sections. The sections are labled with the accession number, followed by "a" to denote the major portion of the paper that consists of the left side of the paper, and "b" to denote the small portion that consists of the right side. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.28 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the sofa seat in stateroom #1. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.29 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/8" fore and aft bulkhead on the starboard side. Material is tracing paper. Paper is in three sections, torn in converging lines so as to separate the sections into a top, middle, and bottom section. Each section is labeled with the accession number, followed by 'a' for top, 'b' for middle, and 'c' for bottom. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.30 | Trumpy Yacht Design, Contract 207 Bulkhead | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "1 1/8" D.F. Panel Bulkhead, Frame #9, Looking Aft," on tracing paper. Paper has separated into 7 different sections. Each section will be labeled with the accession number, followed by 'a' to denote the top left section, 'b' to denote the next section to the right, 'c' for the top right corner, 'd' for the central rectangular sliver, 'e' for the bottom left corner, 'f' for the top half of the bottom right corner, and 'g' for the bottom half of the bottom right corner. Accession numbers have been written on the bottom right corner of the front of the sections, in order to prevent further decay in turning them over. | open CBMM page | ||||
| 1995.0011.0026.31 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the interior pilothouse panels on the port side (Captain's Room) and starboard same but other hand. Material is tracing paper. Paper is in two pieces, each labeled with accession number, followed by 'a' to denote the top half, and 'b' to denote the bottom half. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.32 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the aft end of the Captain's Room. Material is tracing paper. Sheet is in two pieces, though only the bottom half is present. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.33 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 7/8" S.F. panel bulkhead at frame #28 looking forward. Material is tracing paper. Paper is in two pieces, though only the bottom half is present. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.34 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 08/14/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the proposed 120' Diesel Powered Yacht For Truman H. Newberry. Material is coated fabric. A copy of the original is also present. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.35 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 09/24/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts a 120' Diesel Powered Yacht; this drawing is a variation from the proposed drawing at 1995.0011.0026.34. Material is coated fabric. Two copies of the original are present. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.36 | Trumpy Yacht Design, Contract 207 Boat Deck | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 10/05/1929 - | Trumpy Yacht Design, Contract 207 showing "Boat Deck Plan," on coated fabric. A blueprint copy (without signature of approval from Trumpy) and Xerox copy (with signature of approval from Trumpy) of the original are also included. Currently in the original tube case, awaiting acid free tube. | open CBMM page | |||
| 1995.0011.0026.37 | Trumpy Yacht Design, Contract 207 Deck Arrangment | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 10/05/1929 - | Trumpy Yacht Design, Contract 207 showing "Deck Arrangment Plan," on coated fabric. A Xerox copy of the original is also included. Currently in the original tube case, awaiting acid free tube. | open CBMM page | |||
| 1995.0011.0026.38 | Trumpy Yacht Design, Contract 207 Cabin Arrangment | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 10/10/1929 - | Trumpy Yacht Design, Contract 207 showing "Cabin Arrangment Plan," on coated fabric. A Xerox copy of the original is included. Currently in the original tube case, awaiting acid free tube. | open CBMM page | |||
| 1995.0011.0026.39 | Trumpy Yacht Design Contract 207 Construction Plan | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "Construction Plan," a blueprint. A Xerox copy of the original is included. Currently in the original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0026.40 | Trumpy Yacht Design, Contract 207 Shaft and Tanks | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/19/1929 - | Trumpy Yacht Design, Contract 207 showing "Shaft Line and Tank Layout," on coated fabric. A Xerox copy of the original is also present. Currently in the original tube case, awaiting acid free tube. | open CBMM page | |||
| 1995.0011.0026.41 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 04/26/1930 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the sheer, half breadth and body plan, along with principal dimensions of length overall of 121' 3", length at the waterline of 111' 10", beam of 21', and draft of 4' 4", and displacement of 131.3 tons. Material is coated fabric. A Xerox copy of the original is also present. Currently in the original tube case, awaiting acid free tube. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.42 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 05/16/1930 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the body mold lines and is a copy of the original. Some wording within the sheet are written backwards, others forwards. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.43 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steering arrangement and is a copy of the original at 1995.0011.0026.94. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.45 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. One set of Plans A-D with an additional copy of Plan A. Plan A depicts the stairway. Plans B-D depict the stairway as well. Scale is 1" = 1'. The drawings provide construction details regarding a stairway in the vessel, showing plans, and elevation views looking inboard, looking aft and looking outboard. The page also shows the forward and aft locker bulkhead. Material is coated fabric for Plan A; ink on paper for Plans B-D; photocopy for Plan A | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.44 | Motor Yacht Truan | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/29/1931 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steering gear and rudder layout and is a copy of the original (see 1995.0011.0026.92). | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.46 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the pilot house and is a copy of the original (see 1995.0011.0026.95). | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.47 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel girder and tank layout. There is a note that says to see girder layout for contract 203 for details of all the brackets. Material is coated fabric. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.49 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/26/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the rudder layout. The design is for a triple rudder arrangement. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.50 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the stack to be made of #14 Ingot Iron. Material is coated fabric. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.51 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/06/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the fore and aft steel tank bulkheads to be made from #10 U.S.S.G. galvanized steel. Diagrams show three different angles for the design; birds eye, starboard side, and port side. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.52 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/03/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #4 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.53 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #17 looking aft. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.54 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/03/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #40 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.55 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #50 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.56 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/04/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #56 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.57 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/04/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #69 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.58 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/04/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #87 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.59 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/03/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steel bulkhead at frame #106. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.60 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the signal mast and yard. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.61 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the galley ladder. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.62 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the lobby locker outboard of the stairway. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.63 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the bureau, desk, and bookcase in the Captain's Room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.64 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the bureau in stateroom #2. There are various drawings and sketches in the marigns. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.65 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 7/8" after face of the 1 3/4" bulkhead in the Captain's Room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.66 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 7/8" S.F. locker bulkhead in stateroom #3. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.67 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steering stand in the pilothouse. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.68 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the wardrobe in the maid's room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.69 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the interior panels at the aft end of the deck house. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.70 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the locker, port side at the aft end of the deck house. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.72 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/8" fore and aft panel bulkhead on the port side looking outboard. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.73 | Trumpy Yacht Design, Contract 207 Interior Panels | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "Interior Deckhouse Panels, Port Side," on tracing paper. Currently in the original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0026.74 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the pilothouse, owner's room, and pantry. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.75 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the galley dish rack on the port side aft. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.76 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the wardrobe in the aft of the owner's deck stateroom. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.77 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the pantry dish locker. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.78 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the seat, chart locker, and table in the pilothouse. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.79 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the desk in the smoking room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.80 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the port side wardrobe in the owner's deck stateroom. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.81 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the bureau in the maid's room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.82 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the crew's mess table. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.83 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the galley dress on the port side. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.84 | Trumpy Yacht Design, Contract 207 Transom Seat | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "Transom Seat Starboard Side," on tracing paper. | open CBMM page | ||||
| 1995.0011.0026.85 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the mantel chimney breast. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.86 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/8" S.F. panelled bulkhead owner's deck stateroom at the aft end of the room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.87 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts panelled bulkhead at forward end of the deck house. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.88 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 1 1/4" folding doors between the dining room and the living room. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.89 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Circa 05/16/1930 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the body mold lines. Custom House Measurements is written on the reverse of the sheet. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.90 | Trumpy Yacht Design, Contract 207 Deckhouse | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 207 showing "Deckhouse - Raised Panels," on tracing paper. Currently in the original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0028.00 | 96' Diesel Yacht Mono | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #208. Drawing depicts the body plan. While the drawing identifies the name of the yacht as Memory, the official Trumpy index of yacht names by contract number identifies it as the Mono. Material is coated fabric. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0029.01 | 110' Steel Yacht Arminia | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 11/05/1929 - | Plans for a Trumpy Yacht Design, Contract #209. Yacht length overall is 110' 6". Drawing depicts the body plan. Material is card stock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0030.00 | Diesel Yachts Minoco and Lanakila | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 04/20/1932 - | Plans for a Trumpy Yacht Design, Contracts 206 (Lanakila) and 210 (Minoco). Drawings depict the body plan. Material is coated linen. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.91 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the port side outboard panel of the owner's stateroom. The plan is in two parts. The individual parts are labeled with the accession number, and an additional 'a' to indicate the larger portion, and a 'b' to indicate the small portion. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0031.01 | 101' Diesel Yacht Captiva | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract 211. Drawing depicts the stack in a side and top view. Material is a xerox copy of the original. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0031.02 | 101' Diesel Yacht Captiva | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract 211. One set of Plans A-B and an additional copy. Drawing depicts the engine room arrangement and a section at frame #49 looking aft. The plan was split onto two different copies, which are labeled with the accession number and an additonal 'a' to denote the top half, and 'b' to denote the bottom half. There is a third sheet displaying a blown up portion of the bottom copy, but due to redundancies it has not been labeled. Be sure to keep all three together. Material is a Xerox copy of the original. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0032.01 | 98' Diesel Houseboat Virago | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract 212 depicting the side rudders. A note states to use the same pattern as contract 212, indicating the plans are for a different contract number or service order, but as no other number is listed, the sheet is attributed to contract 212. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0032.02 | 98' Diesel Houseboat Virago | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 10/20/1930 - | Plans for a Trumpy Yacht Design, Contract 212 showing half-breadth and body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0032.03 | 98' Diesel Houseboat Virago | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract 212 showing the side rudder port gland in full scale. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0032.04 | 98' Diesel Houseboat Virago | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 10/28/1930 - | Plans for a Trumpy Yacht Design, Contract 212 showing the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0033.01 | 143' Diesel Yacht Alamo | Yacht | Trumpy, John - Builder; Mathis Yacht Building Co., - Builder; Tams & King, N.A., - Designer | Circa 05/03/1931 - 05/15/1931 | Plans for a Trumpy Yacht Design, Contract 214 showing 3/4 mold body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0034.00 | Gasoline Powered Yachts Nahmeoka and Lanai | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 04/28/1928 - | Plans for a Trumpy Yacht Design, Contracts 38 (Nahmeoka) and 194 (Lanai). The Nahmeoka overall vessel length is 64', and the Lanai is 80'. Drawing depicts the rudder detail, including the rudder bearing, stuffing box, and the rudder itself. Drawing was retraced on 4/30/1928. Material is coated fabric and includes a xerox copy of the same. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.92 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/29/1931 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steering gear and rudder layout. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.93 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Exact 12/03/1929 - | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the transom Expansion, MLD is 1 3/4". Scale is 1"=1'. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0026.94 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the steering arrangement with views from the port side looking starboard and from the forward looking aft. Diagrams show the layout of the steering system from the wheel down. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.95 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the pilothouse with a starboard side looking port view and an overhead view. Plan is in two parts. Both parts will be labeled with the accession number and an 'a' to denote the larger section and a 'b' to denote the small section. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.96 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the docking plan, including fuel tank capacity (four tanks at 600 gallons each) and fresh water tank capacity (tanks of various sizes, totaling 2595 gallons). Material is coated fabric. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.97 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the 120' Diesel Powered Yacht for Truman H. Newberry, Esq. This drawing is distinct from the one at 1995.0011.0026.0035, as this depection includes an extra launch on the boat deck, less rigging, and lacks a spar on the signal mast. The plan is also written as "John Trumpy & Sons, Inc, Gloucester City, N.J." John Trumpy & Sons did not come into being until 1943, 13 years after this yacht was built, and the company was not located in Gloucester City until 1942. Material is blueprint. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.98 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts the prposed 120' Diesel Powered Yacht for Truman H. Newberry. This drawing is similar to, but distinct from 1995.0011.0026.0034, in that this one has twin masts such as the other artifact, but is missing the gaff bearing, a flag on the main mast, as well as showing a fully enclosed wrap-around, surrounding the pilothouse, whereas 1995.0011.0026.0034 shows only partly surrounding the pilothouse, the rest being open railing. Material is blueprint. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0026.99 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts 1 1/8" douglas fir bulkhead. Sheet is in three separate parts, and each will be labeled with the accession number, followed by a letter, 'a' through 'g' in order to keep all pieces together. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0027.01 | Motor Yacht Truant | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract #207, built for Truman H. Newberry. Drawing depicts 7/8" S.F. panel bulkhead at frame #40 looking aft. See 1995.0011.0026.01-99 for the rest of the vessel plans. Material is tracing paper. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0035.00 | 48' Auxiliary Schooner Seagoin' | Schooner | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for a Trumpy Yacht Design, Contract 216 depicting the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | |||
| 1995.0011.0037.01 | 80' Diesel Yacht Florence V | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 226. Built in 1935. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0037.02 | 80' Diesel Yacht Florence V | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 226. Built in 1935. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0038.00 | 36' Sailing Cutter Deep Water | Cutter | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 227. Built in 1935. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.01 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the transom projection and inside transom planking. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.02 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts framing. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.03 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the body plan and includes dimensions for the yacht itself. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.04 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts an outline of the framing. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.05 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the body mold lines. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.06 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.07 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the deck plan and cabin plan. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.08 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depict deck plan, cabin plan, and engine room layout details. Material is blueprint paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.09 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing is a rough sketch of the cabin plan and internal arrangements. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.10 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the 7/8" S.F. panel bulkhead at frame 10 looking aft. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.11 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the 7/8" S.F. panel bulkhead, door, locker starboard side in stateroom #2, and bulkhead at frame 16 looking aft. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.12 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the 1 1/8" S.F. panel bulkhead at frame 30 looking aft. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.13 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the steel bulkhead at frame 39 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.14 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the steel bulkhead at frame 74 looking forward. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.15 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the fore and aft bulkhead on the port side. Material is tracing paper. | - Cambridge - NJ | open CBMM page | ||
| 1995.0011.0039.16 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the exterior panels at the aft end of the deckhouse. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.17 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the 1 1/8" panel bulkhead between frames 30 and 19 on the starboard side. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.18 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the arrangement of the owner's quarters ventilation. Material is coated fabric. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.19 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. One set of Plans A-B. Plan A depicts the davits for a 16' launch with AECO Hand Davit Winch. The drawing provides construction details regarding the boat davits. Plan B is a xerox copy of Plan A. Scale: 1" = 1'. Material is tracing paper for Plan A; xerox copy for Plan B. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.20 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the outside panels of the deckhouse. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.21 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the forward deck and pilot house. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.22 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the shaft line layout. Material is coated fabric. A Xerox copy of the same is also available. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.23 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the galley dresser on the port side. A copy of this plan, along with the plans 1995.0011.0039.23 and 1995.0011.0039.25 are consolidated into one drawing under 1995.0011.0039.26. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.24 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the steel bulkhead at frame 10 looking forward. <br />A copy of this plan, along with the plans 1995.0011.0039.23 and 1995.0011.0039.25 are consolidated into one drawing under 1995.0011.0039.26. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.25 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the 7/8" S.F. panel bulkhead at frame 39 looking forward. A copy of this plan, along with plans 1995.0011.0039.23 and 1995.0011.0039.24 are consolidated into one drawing under 1995.0011.0039.26. Material is tracing paper. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.26 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. A combined drawing depicting the two different bulkheads and the galley dresser. The sheet includes drawings from plans 1995.0011.0039.0023-.0025. Material is a xerox copy. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0040.00 | 36' Motor Cruiser Suitsus | Cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1936 | Plans for a Trumpy Yacht Design, Contract 229. Built in 1936. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0041.00 | 90' Motor Yacht Consort IV | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1936 | Plans for a Trumpy Yacht Design, Contract 230. Built in 1936. Drawing depicts the body plan. Accession group 2023.0020 Artifacts and photo collection 1115 are related to this. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0042.00 | 61' Motor Yacht Tritona | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1937 | Plans for a Trumpy Yacht Design, Contract 231. Built in 1937. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0043.01 | 45' 11" Motor Boat Arev | Motor boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1937 | Plans for a Trumpy Yacht Design, Contract 234. Built in 1937. Drawing depicts a body plan. Mateiral is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0043.02 | 45' 11" Motor Boat Arev | Motor boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1937 | Plans for a Trumpy Yacht Design, Contract 234. Built in 1937. Drawing depicts a body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0043.03 | 45' 11" Motor Boat Arev | Motor boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1937 | Plans for a Trumpy Yacht Design, Contract 234. Built in 1937. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0044.00 | 46' Sloop Egret | Sloop | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1938 | Plans for a Trumpy Yacht Design, Contract 237. Built in 1938. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0045.00 | 47' Sloop Far Cry | Sloop | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1938 | Plans for a Trumpy Yacht Design, Contract 238. Built in 1938. Boat overall length is 47' 4". Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0046.00 | 85' Ketch Morning Star | Ketch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder; Pouliot, Ronald C. - Packed by | 1938 | Plans for a Trumpy Yacht Design, Contract 239. Built in 1938. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0047.00 | 55' Diesel Cruiser Nameni | Diesel cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contract 241. Built in 1939. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0049.01 | 91' Diesel Yacht Innisfail | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contract 242. Built in 1939. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0049.02 | 91' Dieswel Yacht Innisfail | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contract 242. Built in 1939. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0050.00 | Diesel Yachts Martha and Jinia III | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contracts 243 (Martha) and 245 (Jinia III). Built in 1939. Vessel overall length for the Martha is 71' and for Jinnia III is 69'. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0051.00 | 76' Motor Yacht Drifter | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contract 244. Built in 1939. Drawing depicts a body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0052.00 | 45' Diesel Cruiser Tech Jr. | Diesel cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1939 | Plans for a Trumpy Yacht Design, Contract 246. Built in 1939. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0053.00 | 64' Diesel Yacht Alcy | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1937 | Plans for a Trumpy Yacht Design, Contract 247. Built in 1937. Vessel overall length is 64' 10". Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0054.00 | 65' Motor Yacht Chanticleer | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1940 | Plans for a Trumpy Yacht Design, Contract 248. Built in 1940. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.27 | Trumpy Yacht Design, Contract 228 General Sketch | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 228, displaying a general sketch of the layout of the hull. No label for the hull number is given, but the dimensions compare well with contract 228. In original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0039.28 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts a sketch of the diagonal bracing over a printed side profile. Across the top of the drawing is written "VOID". | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.29 | Trumpy Yacht Design, Contract 228 Construction | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 228, "Construction Plan" showing framing and bulkheads, on coated fabric. In original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0039.31 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, contract 228. Built in 1935. Drawing depicts the deck arrangement. Material is coated fabric. | - Camden - NJ | Image 1 | open CBMM page | |
| 1995.0011.0039.32 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the cabin arrangement. This plan is similar to 1995.0011.0039.33. Material is coated fabric and blueprint. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.33 | 85' Motor Yacht Innisfail | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for a Trumpy Yacht Design, Contract 228. Built in 1935. Drawing depicts the cabin arrangement. The drawing is similar to the plan at 1995.0011.0039.32; however, this plan has an overlay of pencil markings, modifying the existing printed form. Material is blueprint. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0039.34 | Trumpy Yacht Design, Contract 228 Porthole | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 228, a cross section of an 11" porthole, to scale, and the various surrounding stringers, decking, planking, and frames, on tracing paper. In original tube case, awaiting acid free tube. | open CBMM page | ||||
| 1995.0011.0012.04 | 126' Diesel Yacht Daydream | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1927 | Plans for Trumpy Yacht Design, Contract #190. Built in 1927. Drawing depicts the tiller forging. Material is coated fabric. | - Camden - NJ | open CBMM page | ||
| 2017.0030.0014.01 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. Title is Body Grid. Material is pencil on vellum. | 18.000in - 21.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.02 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. Drawing depicts the outboard profile of the vessel. Material is ink on paper. | 8.500in - 14.000in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.04 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer; D F T, | Exact 01/14/1948 - 01/14/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-2. Built in 1948. Drawn by DMK. Title is Arrangement of Shafting and Location of Rudders. Drawing depicts a partial plan and profile showing the engine shaft locations and the rudder locations. Scale is 1" = 1'. Material is pencil and ink on paper. | 30.250in - 36.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.06 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/26/1948 - 01/26/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-3. Built in 1948. Drawn by DMK. Title is Bulkhead Number 52 Looking Forward. The drawing depicts the construction details regarding bulkhead 52. Scale is 1" = 1'. Material is pencil and ink on vellum. | 14.500in - 15.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.07 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/28/1948 - 01/28/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-4. Built in 1948. Drawn by DMK. Title is Bulkhead #41. The drawing depicts the body plan of the vessel at bulkhead # 41 looking aft with construction details regarding the bulkhead. Scale is 1" = 1'. Material is pencil and ink on vellum. | 15.875in - 18.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.08 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/29/1948 - 01/29/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-5. Built in 1948. Drawn by DMK. The title is Bulkhead 31. The drawing shows a body plan at bulkhead 31 looking aft with construction details relevant to the bulkhead. Scale is 1" = 1'. Materialis pencil and ink on vellum. | 16.750in - 20.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.10 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/31/1948 - 01/31/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-7. Built in 1948. Drawn by DMK. The title is Bulkhead 17. Drawing depicts a body plan of the vessel at builkhead 17 with construction details regarding the bulkhead. Scale is 1" = 1'. Material is pencil and ink on vellum. | 15.500in - 17.000in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.11 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 01/31/1948 - 01/31/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-8. Built in 1948. Drawn by DMK and RWB. The title is Engine Girders and Web Frames (Aluminum). Drawings depicts an elevation view of the inboard girder looking outboard, the outboard girder looking outboard, a partial plan of the vessel with the girder locations, a body plan at frame 8 looking aft and at frame 5 looking aft, and a body plan at frame 4 looking aft and at frame 2 looking aft. A note below the drawing showing frame 5 of the vessel reads that the details also apply to frames 8 and 2. Scale is 1" = 1'. Material is pencil and ink on vellum. | 28.750in - 42.000in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.13 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 05/28/1948 - 05/28/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-10. Built in 1948. Drawn by DMK. The title is Outboard Profile. One set of Plans A-D. Plan A is the outboard profile with a mast shown above the waterline. Plans B-D are copies of Plan A. The scale is 1/2" = 1' for Plans A-D. Material is pencil and ink on vellum for Plan A; ink on paper for Plans B-D. | 13.500in - 35.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.15 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. The drawing depicts the port side profile of the vessel. Material is ink on paper. On the reverse side is a copy of the outboard profile at 2017.0030.0014.14. | 16.500in - 36.125in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.16 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/05/1948 - 02/05/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-11. Built in 1948. Drawn by RWB. The title is Full Size Sections Through Trunk Side. The three drawings depict the vertical section through the ports, horizontal sections through the ports, and vertical section between ports showing boxing for port to slide into when open. Scale is full size. Material is pencil and ink on vellum. | 34.250in - 33.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.18 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/10/1948 - 02/10/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-13. Built in 1948. Drawn by DMK. Title is Shaft Tube Detail. The drawing depicts the construction details regarding the shaft tube. Scale is 1/2" = 1' . Material is pencil and ink on vellum. | 29.500in - 36.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.20 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/17/1948 - 02/17/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-15. Built in 1948. Drawn by RWB. The title is Deck House Joiner Details. The drawing depicts the construction details regarding the joinerwork on the deckhouse sides. Scale is 1" = 1'. Material is pencil and ink on vellum. | 29.000in - 18.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.22 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/19/1948 - 02/19/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-17. Built in 1948. Drawn by RWB. The title is Joiner Bulkhead 29. The drawing depicts bulkhead 29 looking forward with construction details regarding the joinerwork. Scale is 1" = 1'. Material is pencil and ink on vellum. | 14.000in - 18.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.23 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/23/1948 - 02/23/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-18. Built in 1948. Drawn by RWB. The title is Joiner Bulkhead 20. The drawing depicts bulkhead 20 looking forward and looking aft, with construction details. Scale is 1" = 1'. Material is pencil and ink on vellum. | 13.750in - 34.000in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.24 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 02/27/1948 - 02/27/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-19. Built in 1948. Drawn by DMK. The title is Deck House Front Construction Details. The drawing depicts the design and construction of the deck house front. The drawing also makes reference to Drawing #334-12 and 334-16. Scale is 1" = 1' and full size. Material is pencil and ink on vellum. | 30.250in - 36.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.25 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | 1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-20. Built in 1948. Drawn by DMK. The title is Flying Bridge Windshield. The drawing depicts the construction details regarding the windsheild on the flying bridge. Scale is 1" = 1'. Material is pencil and ink on vellum. | 28.750in - 33.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.26 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 03/04/1948 - 03/04/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-21. Built in 1948. Drawn by RWB. The title is Refrigerator and Galley Detail. Several drawings depict the bulkhead looking forward from the cockpit, a section through refrigerator door to cockpit, outboard galley bulkhead looking to starboard, a section through bulkhead 17 looking inboard to port, bulkhead 11 looking aft, a plan view of the galley, and bulkhead 17 looking forward. Scale is 1" = 1'. Material is pencil and ink on vellum. | 19.000in - 32.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.27 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 03/10/1948 - 03/10/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-21. Built in 1948. The title is Strut. The drawing depicts the construction details regarding the strut for the propeller. Scale is full size. Material is pencil on paper. | 35.000in - 36.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.28 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 03/22/1948 - 03/22/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-22. Built in 1948. Drawn by DT. The title is General Arrangement of Piping. The drawing depicts a plan view of the vessel with the piping arrangement overlaid. Scale is 1/2" = 1'. Material is pencil and ink on vellum. | 15.000in - 35.750in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.29 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 03/22/1948 - 03/22/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-23. Built in 1948. Drawn by DMK. The title is Rail and Guard Details and Location of Deck Fittings. The drawing depicts a full size construction plan with details regarding a typcial section through the guard and rail, and half size details of the stem head. An additional drawing depicts a plan of the vessel with cleat and chock locations labeled. Scale is 1/2" = 1' and as otherwise noted on the plan. Material is pencil and ink on vellum. | 33.000in - 36.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.31 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 04/24/1948 - 04/24/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-27. Built in 1948. Drawn by DMK. The title is Mast. The drawing depicts the construction details regarding the mast. Scale is 1" = 1' and full size. Material is pencil and ink on vellum. | 16.625in - 20.750in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.32 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 05/11/1948 - 05/11/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-28. Builtin 1948. Drawn by DMK. The title is Trunk Deck Lounge. The drawing depicts the construction details regarding lounge seating on the trunk deck. Scale is 1" = 1'. Material is pencil and ink on vellum. | 11.000in - 17.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.33 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Drawing #334-2 (partial number). Built in 1948. The title is Construction (partial title). The drawing number and title have been torn away. The drawing depicts a partial profile and partial plan of the stern of the vessel, including the deck lounge and the aft end of the deckhouse. It includes full size construction details regarding specific sections of the vessel. Material is pencil and ink on vellum. | 32.000in - 44.750in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.34 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 05/15/1948 - 05/15/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-29. Built in 1948. Drawn by DMK. The title is Bridge Control Station. The drawing depicts a plan view of the control station and instrument panel and an elevation of the control station. The drawing also provides construction details regarding the steering gear connections to the control station. Scale is 1" = 1'. Material is pencil and ink on vellum. | 11.000in - 17.250in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.35 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 05/24/1948 - 05/24/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Drawing # 334-30. Built in 1948. Drawn by DMK. The title is Forward Control Station. The drawing depicts a plan and elevation of the forward control station. Scale is 1" = 1'. Material is pencil and ink on vellum. | 17.000in - 28.750in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.38 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. The title is Galley Sink and Dishwasher. The drawing depicts a tentative layout of the galley sink and dishwasher. A reference is also made to F.V. du Pont. Scale is 1" = 1'. Material is pencil on paper. | 13.750in - 19.000in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.39 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Exact 05/04/1948 - 05/04/1948 | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. The title is Anchor Davit. The drawing depicts the construction details regarding the anchor davit. Scale is 1" = 1'. Material is pencil on vellum. | 11.000in - 17.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.40 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. The title is Frame 11 Looking Aft. The drawing depicts frame 11 looking aft through the galley. Material is pencil on vellum. | 15.375in - 18.500in | - Camden - NJ | open CBMM page | |
| 2017.0030.0014.42 | 60' Houseboat Tech Jr. | Houseboat | Mathis Yacht Building Co., - Builder; Trumpy, John - Designer | Circa 01/01/1948 - | Plans for a Trumpy Yacht Design. Contract # 334. Built in 1948. The title is Bulkhead 11. Drawing depicts the deck in relation to the cut of the bulkhead. Material is pencil on vellum. Drawing correlates with the drawing at 2017.0030.0014.41. | 8.875in - 36.250in | - Camden - NJ | open CBMM page | |
| 1995.0011.0010.01 | 104' Motor Yacht Shiawassee III | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1935 | Plans for Trumpy Yacht Design, Contract #183. Built in 1927 as the Truant; in 1935 it was renamed to the Shiawassee III. Three copies of the drawing. Drawing depicts the side Rudders for the Shiawassee III. Material is linen and xerox copies. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0036.01 | 87' Fisherman Auxiliary Ketch (Diesel Yacht) Elsie Fenimore | Ketch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1934 | Plans for a Trumpy Yacht Design, Contract 219. Built in 1934 for E.R. Fenimore Johnson, Esq. Drawing depicts the body plan with measurements based on outside planking. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0036.02 | 87' Fisherman Auxiliary Ketch (Diesel Yacht) Elsie Fenimore | Ketch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1934 | Plans for a Trumpy Yacht Design, Contract 219. Built in 1934 for E.R. Fenimore Johnson, Esq. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0036.03 | 87' Fisherman Auxiliary Ketch (Diesel Yacht) Elsie Fenimore | Ketch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1934 | Plans for a Trumpy Yacht Design, Contract 219. Built in 1934 for E.R. Fenimore Johnson, Esq. Drawing depicts the body plan. Material is cardstock. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0029.02 | 110' Steel Yacht Arminia | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 11/14/1929-4/24/1930 | Plans for a Trumpy Yacht Design, Contract #209. Yacht overall length is 110'-6". One set of Plans A-CB. Plan A is the hull lines. Plan B is the sheer, half-breadth and body plans. Plan C is the midship section. Scale is 1/2" = 1' for Plan B, 3/4" = 1' for Plan C. Plan B is stored on a roll tube. Material is coated linen for Plan A; ink on paper for Plan B; blueprint for Plan C. | - Camden - NJ | open CBMM page | ||
| 1995.0011.0012.05 | 126' Diesel Yacht Daydream | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 8/1/1927 | Plans for Trumpy Yacht Design, Contract #190. No Drawing #. Built in 1927. No Title. One drawing depicting the body plan with a note at the bottom stating Void. | 19" - 25" - H 19" x W25" | Camden, NJ | open CBMM page | |
| 1995.0011.0017.02 | 44' Auxiliary Schooner Sea Call II | Schooner | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Built in 1928 for John H. Trumpy. No Title. Two drawings depicting the sheer and half-breadth plans. Plan is stored on a roll tube. Material is sepia paper. | 25.75" - 50" - H 25.75" x W 50" | Camden, NJ | open CBMM page | ||
| 1995.0011.0027.11 | 120' Yacht Truant | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 8/14/1929 | Plans for Trumpy Yacht Design, Contract #207, No Drawing #. Built in 1930 for Truman H. Newberry. Drawn by John Trumpy. Titled Proposed 120' Diesel Powered Yacht for Truman H. Newberry. The plan is used as end paper illustrations in the front and back of the book titled Trumpy written by Robert Tolf. One set of Plans A-C. Plan A is one drawing depicting the outboard profile. Plan B is the same drawing as Plan A, except the data block is moved from the lower right corner to the upper right corner, to fit the design of the end paper layout for the book. Plan C is a copy of Plan A. See 1995.0011.0026.1-99 for the rest of the plans. Material is xerox copy for Plans A-B and blueprint for Plan B. | - Plan A: H 18" x W 24" Plan B: H 8.5" x 22" Plan C: H 11.25" x W 22.5" | Camden, NJ | open CBMM page | |
| 1995.0011.0027.12 | 120' Yacht Truant | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 7/29/1929 | Plans for Trumpy Yacht Design, Contract #207, No Drawing #. Built in 1930 for Truman H. Newberry. Drawn by John Trumpy. Titled 115' Diesel Powered Yacht. One drawing depicting the outboard profile to include the yacht tender. A note in red ink encircling the yacht tender states that the sedan enclosure is detailed on a September drawing. Material is blueprint. | 11.25" - 20.75" - H 11.25" x W 20.75 | Camden, NJ | open CBMM page | |
| 1995.0011.0027.13 | 120' Yacht Truant | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, Contract #207, No Drawing #. Built in 1930 for Truman H. Newberry. Drawn by John Trumpy. No Title. The single drawing is in three pieces and depicts the joinerwork for a bath. One set of Plans A-C. Plans A is the larger piece that shows an opaque mirror, lockers, and a shower looking from forward. Plan B is a piece from the lower right corner indicating the contract number and the location of the build at Mathis Shipyard in Camden, NJ. Plan C is a small piece that appears to be a part of Plan B and it has Mathis printed on it. Material is pen on sepia print paper. | - Plan A: H 13" x W 5" Plan B: H 6" x W 5" Plan C: H 2.5" x W 1.5" | Camden, NJ | open CBMM page | ||
| 1995.0011.0036.04 | 87' Fisherman Auxiliary Ketch Elsie Fenamore | Ketch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 4/30/1934 | Plans for Trumpy Yacht Design, Contract #219. Built in 1934 for E.R. Fenimore Johnson, Esq. Drawn by John Trumpy. Titled Midship Section for 87' Fisherman Type Auxiliary Ketch. One drawing depicting the design of the midship section. Detailed measurements are identified on the plan. Material is blueprint. | 16" - 18.75" - H 16" x W 18.75" | Camden, NJ | open CBMM page | |
| 1995.0011.0038.01 | 36' Sailing Cutter Deep Water | Cutter | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, Contract #227. Special Order #234. Built in 1935 for Charles Welsh. Titled Aft End of Trunk Cabin. One drawing depicting a section at frame 14 showing the aft end of the trunk cabin and its access hatch. Material is linen. | 13" - 16.5" - H 13" x W 16.5" | Camden, NJ | open CBMM page | ||
| 1995.0011.0041.01 | 90' Motor Yacht Consort IV | Motor yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 2/19/1917 | Plans for Trumpy Yacht Design, Contract #230, No Drawing #. Built in 1936 for T. Munroe Dobbins. Titled 17' Yacht Tender. One set of Plans A-B. Plan A has two drawings depicting the sheer and plan views of the yacht tender for the Consort IV. Plan B is a copy of Plan A. Material is blueprint for Plan A and photocopy for Plan B. | - Plan A: H 8.5" x W 14.5" Plan B: H 11" x W 17" | Camden, NJ | open CBMM page | |
| 1995.0011.0135.01 | 80' Express Cruiser All Alone | Cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 6/18/1930 | Plans for Trumpy Yacht Design, Contract #204, No Drawing #. Built in 1930 for George W. Codrington. No Title. One set of Plans A-D with one additional copy of Plan A. Plan A has two drawings depicting the deck and accommodation plans. The plan is used as an illustration in the book titled Trumpy written by Robert Tolf. Plan B is a xerox copy depicting a black and white illustrated drawing of the All Alone. Plan C is one sheet depicting two pages of manuscript describing the cruiser capabilities and design. Plan D has six pages with eleven black and white images, three of which depict the exterior of the cruiser, two depicting the salon, two depicting bathrooms, two depicting staterooms, and one each of the engine room and dining room. Material is xerox copy. | 11.25" - 17.25" - H 11.25" x W 17.25" | Camden, NJ | open CBMM page | |
| 1995.0011.0136.01 | 108' Diesel Cruiser Veruselle | Diesel cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 2/16/1932 | Plans for Trumpy Yacht Design, Contract #215, No Drawing #. Built in 1932 for John R. Hopkins. No Title. Drawing depicts the outboard profile. While the drawing is not specifically marked as Contract #215, based on the date of the drawing and the vessel overall length and type, it is believed to be the Veruselle built under this contract. Material is xerox copy. | 8.5" - 14" - H 8.5" x W 14" | Camden, NJ | open CBMM page | |
| 1995.0011.0138.01 | 85' Houseboat Luneta | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, Contract #118. Special Order #726. Built in 1921 for Col S.L.H. Slocum. No Title. Two drawings depicting an outboard profile and deck plan. Material is blueprint. | 12" - 19.75" - H 12" x W 19.75" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.36 | 38' Passenger Boat | Boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Titled 38' Passenger Boat. Two drawings depict the outboard profile and deck plan. While no date given, the style of the vessel and the fact that this is from Mathis would indicate this is a drawing from the 1930s. Scale is 1/2" = 1'. Material is pen on tracing paper | 19" - 27.25" - H 19" x W 27.25" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.37 | Unidentified Mathis Houseboat | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). One drawing depicts the deck plan of the forward deck house and an incomplete section after the deck house. Another drawing depicts an outboard profile of the front of the deck house with dimensional data for the windows. The plan was originally marked as being from Mathis Yacht Building, but was subsequently lined out and stamped as John Trumpy & Sons Yacht Yard. Scale is unreadable. Material is photocopy. | 24" - 35.75" - H 24" x W 35.75" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.38 | 18' Yacht Tender | Tender | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Two drawings depict the outboard profile and deck plan with some details ghosted in with dotted lines. The engine for the yacht tender was 9-12 horsepower motor. Scale is 1/2" = 1'. Material is photocopy. | 11" - 17" - H 11" x W 17" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.39 | 18' Yacht Tender | Tender | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 8/30/1916 | Plans for Trumpy Yacht (Miscellaneous). Two drawings depict the outboard profile and deck plan with some details ghosted in with dotted lines. Scale is 1/2" = 1'. Material is photocopy. | 11" - 17" - H 11" x W 17" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.40 | 18' Fishing Boat | Boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 8/30/1916 | Plans for Trumpy Yacht (Miscellaneous). Two drawings depict the outboard profile and deck plan with some details ghosted in with dotted lines. The engine for the fishing boat was 6 horsepower Regal motor. Drawing is very similar to that of a yacht tender; however, additional details are added to support the fishing requirement. Scale is 1/2" = 1'. Material is photocopy. | 11" - 17" - H 11" x W 17" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.41 | 19' Owner's Launch | Launch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Three drawings depict the body plan, sheer and half-breadth. Scale is 1" = 1'. Material is photocopy. | 24" - 36" - H 24" x W 36" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.42 | 18' Crew's Launch | Launch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 2/4/1931 | Plans for Trumpy Yacht (Miscellaneous). Three drawings depict the inboard profile, deck plan, and section near midships showing the engine bearer. Scale is 1" = 1'. Material is photocopy. | 24" - 36" - H 24" x W 36" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.43 | 18' Crew's Launch | Launch | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Three drawings depict the inboard profile, deck plan, and half section near midships showing the engine bearer. Displacement of the vessel is 1050 pounds. Scale is 1" = 1'. Material is photocopy. | 24" - 36" - H 24" x W 36" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.44 | 27' Fishing Boat | Boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 5/25/1929 | Plans for Trumpy Yacht (Miscellaneous). Three drawings depict the sheer, body, and half-breadth plans. It also includes a table of offsets for heights and half-breadths. Scale is 1" = 1'. Material is photocopy. | 24" - 36" - H 24" x W 36" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.45 | 27' Fishing Boat | Boat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 5/29/1929 | Plans for Trumpy Yacht (Miscellaneous). Two drawings depict the profile view and internal arrangement. Scale is 1" = 1'. Material is photocopy. | 24" - 36" - H 24" x W 36" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.46 | 66' Twin Screw Houseboat | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). One set of Plans A-D with five additional copies of Plan D. Plan A is the outboard profile. Plan B is a deck plan for the pilot house level and a deck plan for the main deck. Plan C is a deck plan for the cabin level. Plan D has four drawings depicting the outboard profile and deck plans for the pilot house level, main deck level, and cabin deck. They are copies of Plans A-C, but all combined on a single sheet. Scale is 1/4" = 1' for Plans A-D. Material is pencil on linen for Plans A-C, photocopy for Plan D. | - Plan A: H 10.25" x W 25" Plan B: H 12.5" x W 23.25" Plan C: H 6.5" x W 24.5" Plan D: H 36" x W 24" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.47 | Unidentified Mathis Yacht | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Titled Angle Coaming Hatch. Two drawings depict plan and profile views of the hinge. The hinge profile shows the cross section of the hinge, hatch and coaming. Scale is full size. Material is ink on linen | 9.75" - 13" - H 9.75" x W 13" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.48 | Unidentified Mathis Yacht | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Titled Stanchions. Eight drawings depict the stanchion construction for various locations on the vessel. Dimensions for each of the eight stanchions are marked on the plan. Material is ink on linen | 12.5" - 13" - H 12.5" x W 13" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.49 | Unidentified Mathis Yacht | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 1/29/1929 | Plans for Trumpy Yacht (Miscellaneous). Titled Housing for Rack and Pinion Gear. Four drawings depict various views of the rach and pinion gear housing for the steering system. Scale is full size. Material is ink on linen | 17.75" - 31.5" - H 17.75" x W 31.5" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.50 | 78' Diesel Cruiser | Diesel cruiser | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). One drawing depicts the body plan proposed to the Waterman Steamship Corporation in Mobile AL. Material is ink on cardstock. | 19" - 24" - H 19" x W 24" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.51 | Unidentified Mathis Yacht | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). One drawing depicts a partial body plan. Material is ink on cardstock. | 15" - 21" - H 15" x W 21" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.52 | 54' Shrimper | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). One drawing depicts a partial body plan proposed for the Coffee Island Company in Bayou La Batre, AL. Material is pencil on cardstock. | 15" - 22" - H 15" x W 22" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.53 | 54' and 61' Houseboat Cruisers | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht (Miscellaneous). Two drawings depict body plans for a 54' Houseboat Cruiser and a 61' Houseboat Cruiser. It includes dimensional data associated with each of the body plans. Material is pencil on cardstock. | 15" - 21" - H 15" x W 21" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.57 | 101' Houseboat | Houseboat | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 4/15/1929 | Plans for Trumpy Yacht (Miscellaneous). Titled Preliminary Sections. One drawing depicting a body plan. Dimensional data includes 101' length overall, 20' beam, 6' draft, 106.7 tons displacement, .312 block coefficient (BC). The plan is torn into two pieces. Plan A is the smaller piece. Plan B is the larger piece. Material is pencil on tracing paper. | - Plan A: H 12" x W 6" Plan B: H 12" x W 13.5" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.65 | 44' Auxiliary Schooner Sea Call II | Schooner | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Built in 1928 for John H. Trumpy. No Title. Three drawings depicting the sheer, half-breadth and body plans. Vessel dimensions include a displacement of 19,400 lbs and center of buoyancy is a 1.34' aft of station 5. Material is sepia paper. | 14" - 32.25" - H 14" x W 32.25" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.66 | 44' Auxiliary Schooner Sea Call II | Schooner | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. Shop Order #234. Built in 1928 for John H. Trumpy. Titled Molded Bronze Rudder Shoe. Three drawings depicting a profile view of the rudder shoe, a plan view of the rudder shoe, and a section of the bronze casting for the shoe. Material is sepia tracing paper. | 18.5" - 24.75" - H 18.5" x W 24.75" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.67 | 44' Auxiliary Schooner Sea Call II | Schooner | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. Shop Order #234. Built in 1928 for John H. Trumpy. Titled Main Mast Standing Rigging. Two drawings depicting the profile and front views of the main mast and standing rigging. Material is sepia tracing paper. | 28" - 21.5" - H 28" x W 21.5" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.68 | 44' Auxiliary Schooner Sea Call II | Schooner | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Built in 1928 for John H. Trumpy. No Title. Four drawings depicting the plan and profile views of the main mast gooseneck and two section views of related components. Note that the gooseneck diameter is 6.5"; the gooseneck diameter on the main mast standing rigging plan is 7.5" (see 1995.0011.0143.67). Scale is full size. Material is sepia tracing paper, encapsulated in mylar. | 21" - 25.25" - H 21" x W 25.25" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.69 | 44' Auxiliary Schooner Sea Call II | Schooner | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Built in 1928 for John H. Trumpy. No Title. One set of plans A-C. Plan A depicts one drawing showing the sail plan. The sail plan depicts the sail areas for the jib, foresail, and mainsail as well as the centers of effort for each of the sails. Plans B and C are torn remnants from Plan A. Material is sepia tracing paper encapsulated in mylar. | - Plan A: H 25" x W 28" Plan B: H 11" x W 3" Plan C: H 5" x W 2" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.74 | 14' Yacht Tender | Tender | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. Shop Order #878. Titled 14' Yacht Tender. Three drawings depict the inboard profile, deck plan and a section near midships. The plan also includes a table of offsets. Scale is 1" = 1'. Material is blueprint. | 11.25" - 30" - H 11.25" x W 30" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.75 | 18' Yacht Tender | Tender | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Titled 18' Yacht Tender. Four drawings depict the inboard profile, deck plan, a section near the engine, and a section further aft. Scale is 1" = 1'. Material is blueprint. | 10.25" - 29.25" - H 10.25" x W 29.25" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.76 | 16' Crews Launch | Launch | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Titled 16' Crews Launch. Four drawings depict the inboard profile, deck plan, and two sections. The planking style is Clinker built (overlapping planks). Scale is 3/4" = 1'. Material is blueprint. | 15" - 19.75" - H 15" x W 19.75" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.77 | 18' Yacht Tender | Tender | Trumpy, John H - Designer; Mathis Yacht Building Co., - Builder | 8/30/1916 | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Drawn by John H. Trumpy. Titled 18' Yacht Tender. Two drawings depict the outboard profile with ghosting of the engine and seating and a deck plan. Scale is 1/2" = 1'. Material is blueprint. | 8.25" - 14.5" - H 8.25" x W 14.5" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.78 | 18' Fishing Boat | Boat | Trumpy, John H - Designer; Mathis Yacht Building Co., - Builder | 8/30/1916 | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Drawn by John H. Trumpy. Titled 18' Fishing Boat. Two drawings depict the outboard profile with ghosting of the engine and seating and a deck plan. Scale is 1/2" = 1'. Material is blueprint. | 8.5" - 14.25" - H 8.5" x W 14.25" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.79 | 18' Yacht Tender | Tender | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Titled 18' Yacht Tender. Two drawings depict the outboard profile with ghosting of the engine and seating and a deck plan. Engine capacity was 9-12 horsepower. Scale is 1/2" = 1'. Material is blueprint. | 8.5" - 14.5" - H 8.5" x W 14.5" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.80 | 18' Crew's Launch | Launch | Trumpy, John H - Designer; Mathis Yacht Building Co., - Builder | 2/4/1931 | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Drawn by John H. Trumpy. Titled 18' Crew's Launch. Three drawings depict the inboard profile, deck plan, and a section near the engine. Scale is 1" = 1'. Material is blueprint. | 15" - 30.25" - H 15" x W 30.25" | Camden, NJ | open CBMM page | |
| 1995.0011.0143.81 | 18' Owner's Launch | Launch | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Titled Portable Sedan Enclosure for 18' Owner's Launch. Four drawings depict the plan view of the enclosure, construction plan for the enclosure, side view showing the elevation of the closure, and a section at frame 9 looking forward. Scale is 1" = 1'. Material is blueprint. | 14.25" - 22.25" - H 14.25" x W 22.25" | Camden, NJ | open CBMM page | ||
| 1995.0011.0143.82 | 18' Crew's Launch | Launch | Mathis Yacht Building Co., - Builder | Plans for Trumpy Yacht Design, No Contract #. No Drawing #. Titled 18' Crew's Launch. Three drawings depict the inboard profile, deck plan, and a section at the engine housing. Scale is 1" = 1'. Material is blueprint. | 14.25" - 28.5" - H 14.25" x W 28.5" | Camden, NJ | open CBMM page | ||
| 1995.0011.0144.01 | Composite Plat of John Trumpy & Sons Yacht Yard | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | 7/27/1972 | Plans for John Trumpy & Sons Yacht Yard in Eastport, MD. One drawing is a composite plat of all the buildings, piers, and structures associated with the shipyard. The property was divided by 2nd Street with 2.69 acres to the west side and 2.506 acres to the east side. Prior to Trumpy acquiring the property, it was known as the Annapolis Yacht Yard. Scale is 1" = 50'. Material is pen on mylar. | 18" - 24" - H 18" x W 24" | Annapolis, MD | open CBMM page | |
| 1995.0011.0144.02 | Mathis & Trumpy Yacht Yards Contract Listing | Yacht | Mathis Yacht Building Co., - Builder; John Trumpy & Sons Yacht Yard, - Builder | Listing of contracts worked by both Mathis Yacht Building Co. and John Trumpy & Sons Yacht Yard from 1909 - 1954. It lists all of the contracts, boat names/numbers, and owners. One set of Plans A-C. Plan A lists contracts 1-139. Plan B lists contracts 140-277. Plan C lists contracts 278-369. It appears this table was used by Robert Tolf in his book titled Trumpy. Material is pen on linen. | - Plan A: H 16" x W 28.5" Plan B: H 18" x W 29.5" Plan C: H 17" x W 21.75" | Camden, NJ | open CBMM page | ||
| 1995.0011.0031.03 | Trumpy Yacht Design, Contract 211 Boat Deck | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 211 showing "Boat Deck Arrangment," a Xerox copy of the original. | Image 1 Image 2 | open CBMM page | |||
| 1995.0011.0031.04 | Trumpy Yacht Design, Contract 211 Cabin Arrangment | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 211 showing "Cabin Arrangment Plan," a Xerox copy of the original. | Image 1 Image 2 | open CBMM page | |||
| 1995.0011.0031.05 | Trumpy Yacht Design, Contract 211 Main Deck | Yacht | Trumpy, John - Designer; Mathis Yacht Building Co., - Builder | Trumpy Yacht Design, Contract 211 showing "Main Deck Arrangment," a Xerox copy of the original. | Image 1 Image 2 | open CBMM page |